Hi guys. I'm not seeing a distortion plot with an imported impulse response from Acourate. I imported a 2448 wav from Acourate into the Osx version of REW. I can see the impulse, frequency response, waterfall, but no distortion plot. The get info said the impulse was at negative 125 ms so I...

Hello, i have an issue regard the scope chart.. For all the measurements i did, this is the only one never shown in rew. :dontknow: What could be the problem? Thanks!

Is plot plot to be added in future release?

http://upload.wikimedia.org/wikipedia/en/archive/0/02/20140319151353!The_Amazing_Spiderman_2_poster.jpgReleasing Distributor(s): Sony/Columbia Pictures/Marvel Director: Marc Webb Starring Cast: Andrew Garfield, Emma Stone, Jamie Foxx, Dane DeHaan, Colm Feore, Felicity Jones, Paul Giamatti, Sally...

Hi Guys/Gals, First let me start by saying this site is amazing. I am so happy to have found this community. I can't believe REW is free. :sn: I just moved into a new house and have been setting up my room. Here it is, less than ideal. Here are the responses from 3 different positions in my...

I would like to use REW to plot the amplitude response of an audio processing device (BSS Audio SoundWeb). Because it is digital, and the audio passes through A/D and D/A converters and there is some amount of delay. After calibrating the sound card with an analog loopback, I run an SPL...

Hi, my first post here. My goal is hifi stereo system for music alone. With a friend this afernoon we have experienced an unusuall response on the excess group delay plot. We think:blink: I hope someone can clarify this one. Two mainspeakers an one subwoofer are used, the Mic is at the...

This makes no acoustic or electrical sense to me: I have a REL sub that has the option of a high-level input directly (parallel) from the amp terminals to the speakers. This allows the sub to be driven by the same signal as the speakers. There are two "hot" wires and one ground so you get to...

Hello everyone, I just made my first plot using REW. I am kind of thinking that something must be wrong with the way I am measuring, and maybe some of the more experienced members of this forum can help me out. I just wanted to get familiar with the software, before I started measuring my home...

The room is 19'L x 12'W x 8'H, I have 2'x4' traps that are: four 6 inch thick ones, two 4 inch thick ones, and two 2 inch thick ones. I also have some foam on the walls at the first reflection points totaling 4 feet by 3 feet, on each side. So do I need more traps, or should I get a Feedback...

When I'm targeting a room mode, I find it's easier to see what effect it had on the decay by plotting the spectral decay points for that frequency. Would this be a feature that could be added to REW?

Is it possible to plot 2 meters at the same time? I was talking to a friend of mine about speakers and he mentioned somthing that i wonder about now. He said he never liked speakers with rear porting, he said somthing about phase or somthing. That the front of the speaker has a different wave...

Hi there, I have spent every night this week until 1am trying to sort out my EQing using REW. I can get my graph nice and flat no problems but when I produce a waterfall graph it all goes wrong. I have run two measurements using the same bfd filters and the waterfall graphs are completely...

Hi to all, I've a few questions / comments after my intiial experience with REW. 1. REW, sensational piece of work, thanks John 2. I read many threads to determine which USB soundcard to use with my laptop (HP6730 with XP) Finally settled on the Behringer UCA202, cheap and line in, line out...

I EQ'd my sub a while ago based on the frequency response graph alone before understanding the importance of using the waterfall plots. Now I'd like to get some advice on the matter because subjectively, the bass still sounds a bit hot in spots. So here is what I was dealing with (FR plot of...

Hi, It must be me, but I can't find a setting to show a phase plot. If it's not me. Will this be available in a future version? Thanks. Iain.

I've read the manual explanations of the perspective control sliders, but I am wondering if I am missing this functionality: Can perspective be turned off entirely while maintaining a 3D plot in the Room EQ Wizard? Thanks, Chris

Last nite I redownloaded WinISD and entered Fi IB18 data via the recommended proceedure from a thread on this forum. It worked perfect, one of few times I entered driver data with almost no unknows before clicking save and it was accepted. But, I plotted the recommended/suggested sealed and...

If I perform a basic sweep of the room I can generate a waterfall plot from the recorded data right? There is nothing extra you need to do when taking a room measurement to later generate the waterfall plot? The reason I ask is that my frequency response looks good but the water fall shows...