Hello everyone. First time poster here.
first of all, i must say, reading some of these threads, i'm very impressed by your civility! lol definitely not what i'm used to seeing being on forums in general.
Ok, so here's what i've got:
a basement that's about 30ft long by 17 ft wide (roughly)...
I have been studying REW video tutorials and the manual for days. I initially had problems getting things working but have finally made it through these steps:
Calibrated soundcard via feedback loop
Calibrated SPL, balanced mic input to match pink noise
Did the sine sweep to measure the room...
hey guys, this is driving me crazyy!! :gah:
i need some help filling up the T/s sheet for my sub so i can model a new enclosure... i cant seem to make it work... lot of parameter i really dont understand and cant seem to find any more info on google... (hg, hc, xlim, fLe, KLe, etc.... )...
Friend wants to build a 500 watt plate amp powered sub for this living room.
He's a bit picky on what brand speaker so I'm going with it.
Power Handling (Watts RMS): 600 Watts RMS 1200 Watts Max
Voice Coil Diameter: 2.5" (65.5 mm)
Magnet Weight (oz): 96 oz. (2.73...
Ok this all started with a blown sub in a cheap klh sub...so i had an infinity perfect 10.1 i stuck in the box store toy. About 2 yrs later the plate amp died so there it sat...I decided the available plate amps in my price range where Not what i was looking for so i searched for months for a...
Hello there all.
I bought this sub used about 6 months ago and its been working great until yesterday. I had been tweaking crossover settings on my Yamaha amp and noticed a few crunchy popping noises during playback, then all of a sudden it started humming/buzzing fairly loudly. It only hums...
im looking at buying Pioneer Elite VSX-90TXV for $220 from a friend, i have 2 dx7 cerwin vegas, 255watt max and 4ohms, i have 2 Panasonic sb-ch150 speakers, 60w, music; 30w, din and 4 ohms, i also have 2 sony ss-h700 speakers, 6ohms: 50w, will these speakers be fine with that receiver? should i...
I need some recommendations before purchasing a pioneer receiver VSX-1021, here is the link:
does it have any problems?
I have an important question about its power amplification, the specs state that it...
i have a problem i think that it's because of hdcp.
when im connecting the laptop to the TV it works fine
the problem is when i'm connecting with the receiver i see the picture but sound is going out from 2 front speakers only and after a while i loose the picture too
when i'm connecting the...
hi every one
i just bought JVC DLA 550 HD and am looking for screen so can any one help plz.
my room detail is :
T 15,9 W 11,11
height of my ceiling 8,9
seating distance 12,6
the throw distance is 14,2
behind me shelf or rack table I've but all my devices and am planned to put the pj in the...
First post here.
We are constructing a new home with a dedicated home theater. I have attached the floorplan.
I have been out of technology for a few years now but would REALLY appreciate some advice with regards to home theater design.
Framing is almost complete of the home...
Hi, I am a complete newb to everything. I got an sx650 amp by kicker, it sounds like it prolly puts out arround 750rms of true power. It pushed 800rms audiopipe no problem cranked 3/4 way.
I am driving arround in 01 intrepid so I got a real big trunk and never put anything in it. I am more...
Man I know this a total noob question but I truly need help reading a RS SPL. Ive had the meter for years now and really never put much effort into it with cal. a sub. My BFD arrives tomorrow and Ive begun the cal. process and I spend most of the time trying to figure out how to read the...