Search Results for ‘porting’

here in the bottom part of my riser. I couldnt find 2 x 12's so im using 2 x 6's. I am framing out both sections then laying the other on top and securing them. My question is this. I ported the bottom part but block it in, and also going to port the top section in front as well...

Hello all, I am new here but not new to speaker and subwoofer building. My reference books are the two Radio Shack manuals from the 1990s - Building Speaker Systems and Advanced Speaker Systems. Those, plus available on-line calculators, have allowed me to design optimum enclosures for a few...

Have an 10th Anniversary Edition - W7 13.5-inch Subwoofer Driver (1500 W, Dual 1.5 Ω voice coils) And building a 150 L box, bur it maby 140 L after i put in the subwoofer and port and some brazing ? I Wonder port zize ??

Ok, I had an idea in my sleep last night but there is a possibility it’s a completely dumb notion. Is it possible to build a sub in an enclosure and port in through a floor or wall? I know of the IBs but my house design does not allow attic space. Could I somehow build it into the floor? This...

I am installing a BOSS Audio BOSS600 powered low profile sub in the side hard side saddlebag of a 2004 Harley Electraglide. If I mount the sub to the inside of the bag can I cut a hole vent out sound?

Hello, Here is what I have available for cabinet space for a dedicated HT subs. 28" x 28" x 30" not including any bracing or the driver. Questions being what size port do I need and what is the best design for the port due to the size of the cabinet? What tunning should I be able to get with...

An open stairwell ~5' x 3' lies about 4' in front of my listening position. My boarded walls slope at 45 degrees with only a 6' wide boarded ceiling. The room is about 27' long. There is a large window on the far gable end too. The IB is in the wall to the left with another 7 feet of...