Home Theater Forum and Systems banner

pre-amp

  1. Has anyone used a miniDSP 2x4HD/DDRC-24 as a pre-amp?

    Audio Processing
    Has anyone used a miniDSP 2x4HD/DDRC-24 as a pre-amp? I've been researching into adding room correction to my 3.1 system (my trusty Arcam Alpha 10 DAVE & 10P3 power amp, M&K S85 LCR speakers, and a SVS 20-39 sub). It occurred to me that I could simply use a miniDSP 2x4HD or DDRC-24 as a...
  2. Thorens MD-150-AB pre-amp?

    CD Players | Turntables
    I have my parents old Thorens TT and would like to be able to connect it to my stereo system or even directly to my computer to digitize LPs. Currently there are just some old RCA cables coming off the back. Can I plug them directly into the stereo or computer or will I need a pre-amp? On my...
  3. Phase Linear Amp, Pre-Amp, Tuner,

    Home Theater Receivers | Processors | Amps
    I purchased a Phase Linear DRS400 Power Amp, a Phase Linear P3600 Pre Amp and a Phase Linear T500 Tuner. I can't seem to find much Info. about these on the net. Wondered if anyone would know anything about all or any of these three?
  4. REW for measuring electrical response of Pre-amp and using external tones?

    REW Forum
    I would like to measure the electrical response of a pre-amp's subwoofer/.1 LFE output to examine the following.. 1. When a room correction mechanism like Audyssey or Anthem ARC is used, is it consistent across sources, for example what happens when the player decodes vs when it bitstreams...
  5. Amp, Pre-Amp, Processor

    Home Theater Receivers | Processors | Amps
    Hi, Can someone briefly explain why you would need a Amp, Pre-Amp and Processor in your set up. I have been onto the Emotiva site and was surprised to see this sort of configuration or did I misunderstand. I have a yamaha rx-v1000 receiver at the moment, seems simply by comparison. Thanks. Mark
  6. Pre-amp options with focus on audio not video

    Home Theater Receivers | Processors | Amps
    Interested in hearing opinions on preamps (new/used/whatever). I'm looking for something: Supports > HDMI 1.1 to allow multichannel PCM input. Has excellent DACs, must sound good in 2 channel mode with digital sources Analog audio input quality not critical Video processing not critical (no...
  7. Pre-Amp

    Home Theater Receivers | Processors | Amps
    I was reading around, and I guess i should start planning for it sooner than later, I want to get a pre-amp for the towers. I think I should, but have no clue of where to start. Furthermore, I was thinking of getting a more powerful pair of towers...but I really love my Polks now. Is 150watts...
  8. Mic Pre-Amp Options

    SPL Meters | Mic's | Calibration | Sound Cards
    I'm thinking about upgrading to a Behringer ECM8000 Microphone for the REW software. Are there other pre-amp options to the XENYX 502, 802 mixer boards?
Top