Home Theater Forum and Systems banner

reciever

  1. Denon AVR 1513 2012 reciever and new 4k TV

    AV Home Theater
    Hello All, I am purchasing a new 4k hdtv soon, and I am wondering if there is a way for my 2012 Denon AVR receiver can process the 4k, assuming not, is there a work around or is a new receiver necessary. Thank you in advance to anyone that can help me, I am a novice! Kevin
  2. Pioneer 6ohm reciever with Samsung 3ohm speakers?

    System Setup and Connection
    Hello! I am very new to all of this; just got my own place after graduating. I bought a set of samsung speakers (5 speakers + subwoofer) from a second hand store about two years ago pretty cheap with a mind to use them once I got where I am now. Yesterday I found a pioneer receiver at a local...
  3. Replacement recommendations for older home theater reciever

    Home Theater System Recommendations
    Hi all, The wife and I have recently purchased a new home and with it came a Yamaha DVX-S100 home theater system (Since I'm a new member, the forum won't allow me to insert a link, but you can see the DVX-S100 on amazon). Overall, we're really happy with it. The one issue I have is that we're...
  4. bestt reciever to use with rrssl cg24 sspeakerer package?

    Home Theater System Recommendations
    hi all i am affter buying the rrsl cg24 5.1 speaker package but i neeed a rerciever i want to be able to do 11.2 soundd dolby atmos dts x plus has hdr support hdcp 2.2 hdmi 2.0a spec 2015/2016 models basically i want the perfect partner reciever that will fully justify what the speaker package...
  5. Help finding a Sony av reciever

    Home Theater System Recommendations
    I have a Denon AVR02807(oldest) + Marantz SR-5005 & my Sony STR-DN 1050 sounds better! I want a Sony AV receiver with wi/fi + blue tooth + apple play & PREAMP out puts. I have an external amp. Can't find one.
  6. Reciever cooling

    Remotes | Cables | Accessories | Tweaks
    K gang I have some box fans that are currently hooked up with 120 vac toggle switch and was wondering is there any inexpensive way of making it thermostatic controlled ie with a thermostat and possibly a temp display . that sits on top of the reliever and turns the fan on at a set temp of say...
  7. Looking at an external eq or Upgrade Reciever?

    Electronic Processing/Equalization Devices
    I have a Denon avr-x3000 and am wondering the best easiest route for further subwoofer eq... The Receiver has Audyssey multieq xt and does an ok job but the subwoofer area it seems to lack... boomy peaks here and there... Is it time to upgrade to a Audyssey Multieq xt32 with sub ht reciever...
  8. Primare HDMI issues?

    Home Theater Receivers | Processors | Amps
    Hi, I am currently using a Primare SPA22HD receiver and getting a bit annoyed with the HDMI board. It has always been slow with the handshake and a little bit itchy, and I now found out that it doesn't seem to pass through the HDMI signal unaltered. It will clip anything below reference black...
  9. upgrade reciever. need help!!!

    Home Theater Receivers | Processors | Amps
    Have def tech 8040st's and pro center 2000. And I'm getting the 8040 surrounds. What's avr should I go with. Marantz sr6008 or sr7008. Denon x4000. Yamaha aventage 1030 or 2020. I plan on adding front highs as well. I mainly use my system for movies.
  10. 3 ohm reciever to 8 ohm powered subwoofer

    System Setup and Connection
    I have a Samsung surround system that has 3ohms and just purchased a Polk powered subwoofer (8ohms). could this damage the subwoofer at all and if so is there a way to protect it. I really don't care too much about the Samsung receiver as I am looking to upgrade that in the next month or two...
  11. Reciever Help

    Home Theater Receivers | Processors | Amps
    Just got my new Klipsch speakers and Outlaw sub set up and I am having a problem with my Onkyo 805. I could not get any sub signal. No matter what I tried I could not get sound out of the subwoofer running test tones. I tried my old sub and my new one and nothing. I finally did a factory...
  12. Help with dual passive sub hookup to old reciever

    System Setup and Connection
    I'm set on buying a pair of 10 inch Monoprice passive in-wall subs and I'm not sure if I could use my old receiver as a dedicated amp for them. Here's how I understand it but I'm not sure if it will work or if there's not a more suited solution as I have never done this before. So I would be...
  13. Two Subs to Single Reciever

    Home Theater System Recommendations
    I have a 5.1 channel receiver that I would like to have connected to two separate powered subs. I know there is a way to do this but what would be the best way to wire this?
  14. What reciever should I purchase..

    Home Theater Receivers | Processors | Amps
    So I am looking to upgrade my system. I own a full set of B&W 700 series speakers fronts mids surrounds and sub, powerwd by a Rotel RSX 1057. We also have two book shelf speakers in the library and a speaker on our deck powered by the same Rotel. I want to get a new reciever and am getting...
  15. typical reciever subwoofer output impedance?

    Home Theater Receivers | Processors | Amps
    i dont completely understand output impedance, so forgive me if this is a dumb question, but is there a typical output impedance for a home receiver subwoofer output (I have the denon avr1913)? I've been running that subwoofer rca output to a 1/4" adapter directly into a qsc rmx850 bridged for...
  16. Does "Stereo" or "Straight" bypass AV Reciever settings ?

    REW Forum
    Does "Stereo" or "Straight" on the AV Reciever bypass Crossover and Small or Large settings for measurements with REW ??
  17. Wireless transmitter/ reciever.

    System Setup and Connection
    Hi, I have a Denon AVR3313 receiver which is too far from my wireless AP to run a cat5 cable from directly (least not with out a LOT of hassle). Does anyone know of a wireless transmitter with Cat5 capability which can be used to connect to the wireless AP, transmit the signal and the receive...
  18. What Reciever, Processor, Amp for Paradigm 100's v3?

    Home Theater Receivers | Processors | Amps
    I have a pair of Para 100's v3 that I will be running as well as the Para center and surround speakers in my basement HT. I plan to use the system for music and HT 50/50. I need some help on which reciever, processor or amp i need to run this system to the best. Do I go with a processor and...
  19. Looking for reciever info

    Home Theater Receivers | Processors | Amps
    I have starting finishing my basement it's full open but I'm dividing the room. One side is going to be a bar for entertaining. On the other side I'm planning on a surround sound theatre system. So I'm looking for info on a decent receiver.($500-$1000) if anyone could help me out that would be...
  20. Marantz NR1403 Reciever Review

    AV Receivers, Preamps, Processors & Amp. Reviews
    Marantz NR1403 Review By Luther Ward Introduction Home theater like most things is not a black or white thing but a lot of gray. What should I buy? What do I need? How much is too much? Is this OK? The list goes on and on. The one question you must take into consideration is how good is...
Top