Home Theater Forum and Systems banner
reflective
1-6 of 6 Results
  1. Home Audio Acoustics
    Hello, I live in Mexico and Im building a HT for my family, it is a dedicated room 100% movies. Room dimensions are 11m long 7m wide 2.41m heigth. All surfaces are poured concrete. I will build 1 side wall of drywall to avoid some columns as well as a back wall same drywall. Final dimensions...
  2. Home Audio Acoustics
    How far above or below seated ear height does a reflective surface have to be before it's less of an issue to treat?
  3. DIY Screen Development and Testing
    For some time now we have been searching for a replacement for Craft Smart Metallic Silver paint so that people outside of the U.S. could make our Cream&Sugar™ screen mix. It turns out that CSMS is a more singular paint than we had first thought and a direct replacement still hasn't been found...
  4. DIY Screen Development and Testing
    We have a number of experimental mixes in development; one that has been designated HTS-X2 has recently been tested by 1canuck2 and he will be adding info and photos to this thread. HTS-X2 is part of a family of mixes that will run from N9 to ~N7.6. The paints used in these mixes are readily...
  5. Home Audio Acoustics
    I'm planning to build some basstraps. Probably triangle ones stacked with rockwool. Let's say I want them to be reflective of migh mids and the highest frequencies. What reflective material do I then use? I would also like to know what different types of reflectives can do as to which...
  6. DIY Screens
    4-27-11 This thread will be maintained for those that already have a C&S screen and wish to discuss it, and for historical reasons. These formulae will not work with the current Craft Smart silver paint sold by Michael's. Those wishing to built a new C&S™ screen should read the thread on the mix...
1-6 of 6 Results
Top