Home Theater Forum and Systems banner
removing
1-8 of 8 Results
  1. DIY Speakers
    I have an old pair of MTMs that were made by Zalytron. The veneer is not holding up well and is peeling badly at this point. Anything easier than old fashion scrape and sand? Cabinets are 1 1/2 front and sides with a 3 inch thick back and are as solid as could be. I think they are worth...
  2. Video Game Systems | Video Games
    Activision Enforces Call of Duty Elite After Removing Free Videos When the world learned that Activision wasn’t joking about charging yearly fees for additional services related to the Call of Duty series, reality set in. Games might be overpriced, and DLC may have its own problems, but...
  3. REW Forum
    I have a sharp trough peak at 145Hz which coincides with the 7.8ft between my mains and my listening couch. I assume that when I sit there to listen, the absorption will not occur the same and maybe I should not worry about it. Correct? The bigger question is how does one eliminate troughs...
  4. Movies | TV Shows | Hollywood
    First off, if this is in the wrong place feel free to move it, if you can decide where to put it, I couldn't so it ended up here. ok, so this is just me being picky probably, but others might want to know too. we all know how well stuck on the rating stickers are, and generally they are...
  5. Video Game Systems | Video Games
    Sony Sued Again For Removing PS3 Linux Feature Two more class action lawsuits filed against SCEA. by Jim Reilly May 7, 2010 -Two more class action lawsuits have been filed against Sony Computer Entertainment America for removing the 'Other OS' feature from the PlayStation 3. The first...
  6. AV Home Theater
    Want to refinish a night table. It has a veneer coating which has cracked and chipped. I'd like to get it off. Any suggestions,
  7. Mitsubishi
    Hi All, I am attempting a IC replacement to fix a convergence issue on this set. Got it for $20 from a friend, so thought it would be a good project, as with the IC chips, I shouldn't have more than $75 invested. I am about to remove the main PCB and have a question about the one of the leads...
  8. Samsung
    While watching the tv one day I heard something that sounded kind of like glass breaking and then the colors on the TV went crazy. Also When the TV turns on there is something spinning inside that seems to be either off center or part is broke off and vibrates pretty bad. O and I get no...
1-8 of 8 Results
Top