Search Results for ‘repairs’

Re: CRT based RPTV Convergence Repairs This is my 10 year old Panasonic 32SF35, I've been thinking it's a convergence issue, but don't really know where to start. It seems more severe than the problems discussed. Can someone verify if this is the same issue presented in this forum and...

Re: CRT based RPTV Convergence Repairs Icaillo, I have Toshiba TV 43AX60A, chassis N0NSP. The canvergence chips were STK392-110. Your suggestions were to buy the same or upgrade to 150. I've bought STK394-160E (supplier was out of 150). Also I used the heat sink compound. I got the following...

I continue to see people having problems with convergence repairs, and with what they believe to be convergence problems. There are some important facts that many do not seem to understand, most importantly that these repairs are often not just a matter of replacing a couple of chips. What is...

WS-55807 Convergence Repairs Parts / Manual Questions First of all ... THANK YOU to those who have contributed to the knowledge on this thread. It is amazing. Make and Model: Mitsubishi WS-55807. Symptoms: Red convergence is off. It will not move in one direction. Re-setting to factory...

Re: CRT based RPTV Convergence Repairs Hello, new to the site....I have a 51mp392h/17 magnavox that has some convergence problems. The red and green are bent or not converging at the top corners and bottom left side, this is usually more visible when text are on the screen... Now for the bad...

Ok I have a 53FDX20B I puchased and installed the IC's from the kit. The kit also came with two 4.7ohm 1watt resistors. I am not finding any info that mentions resistors with the 4.7ohm value. I did find a list on another site and I was wondering if you could shine some light on it for me? It...

Hi all. Newbie here. I have a 6-7 year-old Philips 55PP9502 with some convergence issues. On New Year's eve I noticed the "rainbows" at the upper corners of the screen and on the bottom. The green was off. On the customer menu only red and blue can be adjusted. So I got into the service menu...