Home Theater Forum and Systems banner


  1. Sony VPL-HW45ES projector Replacement bulb

    Home Theater Projectors
    I'm not sure if this is the right place to post, but i got the replace bulb/filter today and wanted to know the best option for purchasing a replacement bulb for my Sony VPL-HW45ES projector. The Sony bulb's are around $450-499 ($499 on the Sony site), but i saw some replacement bulbs on...
  2. Replacement for Krell 20i

    CD Players | Turntables
    After 25 years my Krell 20i kicked the bucket and I am looking for a replacement. However, I am presently converting my system to HT but trying to maintain the capabilities of a 2 channel system. I will be less dependent upon the CD player since I recently incorporated a Innous Zenith III...
  3. help !xli 800 power cord replacement

    Home Theater Receivers | Processors | Amps
    does any know of a power cord replacement for the crown xli 800 amp i need one thats less stiff an at least 5feet?
  4. Replacement for Reckhorn B-2 active bass extension & subsonic

    Ported Subwoofer Build Projects
    Hello, I currently have a B-2 active bass extension & subsonic with a crown pro amp. I’m looking to find a replacement. What is everyone using?
  5. Samson XP360B - Speaker replacement

    DIY Repair and Maintenance
    Hi everyone!!! I own a Samson Expedition Express XP360B I would like to replace the tweeter but I can´t figure out how to remove the front panel to access to the speakers. Can anybody help me with this??? Thanks a lot!!! LF
  6. RCA Power Supply Board Replacement

    DIY Repair and Maintenance
    Last weekend I was wakened by a thunderclap that sounded like a cannon was fired just outside my window. Later when I got up I started noticing some problems. My fridge was out due to a tripped breaker. The old stereo in my bedroom was powered but mute. The computer in my office had no internet...
  7. Need a replacement amp

    Subwoofer Amps | High Pass Filters
    Well it’s been awhile and I’ve finally moved into a house with a basement. My old set up was using a behringer EP2500 but one of the channels went bad. I was also pairing it up with a behringer ultra gain pro for Hi/Lo pass filters. Was looking at Inuke 3000dsp, but I had a couple of questions...
  8. replacement crossover for B.I.C. VENTURI DV-84 an DV64

    DIY Speakers
    does anyone know if both the BIC Venturi DV84 an dv64 inturnal crossover can be replaced with the Dayton Audio XO2W-2K 2-Way Speaker Crossover 2,000 Hz
  9. Dimness after lamp replacement

    Home Theater Projectors
    I am new to the board and have a problem I am looking for some help with. Not sure if this in in right place so bear with me. I have an Epson 8350 Home Theater Projector. It is about 6-7 years old. Just replaced the lamp twice with 2 new lamps and they are both very dim. Picture is fine, but...
  10. Sub amp replacement ???

    Subwoofer Amps | High Pass Filters
    Good afternoon all! I have two stereo integrity 15"d4 I believe they are rated around 900w a piece. I had been using the behringer ep4000 until my dog decided to use it as a fire hydrant. It did not survive! I am looking at the inuke. Should I get the NU4-6000 or the NU-6000. Drivers are in...
  11. Board replacement

    DIY Repair and Maintenance
    I have Blaupunkt 32"TV (Model No. 32/1471-GB-5B-HBKUP-EU) that has stopped working believed to be the LED driver. I have sourced a replacement board with the same number (tp.msd309.bp85 / 02-shy09b-chu1). The seller has said that as long as the number is the same it will work but I have read...
  12. Pioneer sc lx83 replacement MCACC microphone? APM7009

    So my cats have decided to chew through my MCACC microphone cable for my Pioneer sc-lx83. The AV receiver is dated 2011 and Im having trouble getting hold of a replacement for it due to the age. The part number is APM7009 and I have literally gone through every link google has given me. The...
  13. InFocus IN76 Very Dim Replacement Bulb

    Home Theater Projectors
    I just got a neat InFocus IN76 at a Goodwill thrift store for under $30 USD :) and the bulb that was in it had over 5000 hours on it but still was pretty good. I wanted to get a new bulb so it would be brighter, so I got a bulb and housing online and when I installed it, it is extremely dim...
  14. Replacement recommendations for older home theater reciever

    Home Theater System Recommendations
    Hi all, The wife and I have recently purchased a new home and with it came a Yamaha DVX-S100 home theater system (Since I'm a new member, the forum won't allow me to insert a link, but you can see the DVX-S100 on amazon). Overall, we're really happy with it. The one issue I have is that we're...
  15. Replacement driver suggestions

    DIY Subwoofers - General Discussion
    Hey guys. A little over a year ago I pieced together my first decent home theater with surround sound running older speakers. Currently running a Samsung 55" 4k tv, Pioneer 5 channel amp, nht towers, center and bookshelf speakers with a boston acoustics vr500 subwoofer. In general I'm very...
  16. Driver Suicide - Replacement Needed

    Sealed Subwoofer Build Projects
    I had a subwoofer death in the family. My AE 15 inch driver killed itself watching the new Star Wars movie. I need to replace the driver and would like to know some opinions on a suitable replacement. It is been a wile since I built these, but the box is between 3.0 and 3.5 cu ft. I am...
  17. Help, 12" replacement driver for old Infinity IL120 sub

    DIY Subwoofers - General Discussion
    I have an old Infinity Interlude IL120 subwoofer. The plate amp died and I replaced it with a Behringer inuke1000DSP amp. The amp rating is 750W RMS and 1000W Max. The amp allows me to add both highpass and lowpass filters plus any parametric filters. The net internal dimension of my...
  18. Replacement for SI HT18?

    DIY Subwoofers - General Discussion
    So now that the bargain SI HT18's are no longer available, what is the "next best thing" to replace them in DIY builds? I'm looking for something similarly priced with similar performance if it available. I have heard good things about the Dayton UM18, are there other 18" drivers in the $150 to...
  19. Need hep with STK replacement

    DIY Repair and Maintenance
    I have a Hitachi rear projection (43FDX11B). I have replaced the IK04 and IK05 convergence chips a couple times over the past 5 years. I have just completed the repair again and now I am having trouble. I "think" that my problem is that I have bridged the pins on 1-2-3 on IK04 when I did the...
  20. Tweeter Replacement

    DIY Speakers
    So I have some Pro Studio ps412-1 speakers I bought off craiglist and I can't find much about them anywhere online. I've had them for about a year and the tweeter and mids on them just recently have stopped working all together. I'm assuming the drivers failed. I opened them up to see if I...