Home Theater Forum and Systems banner
replacement
41-60 of 158 Results
  1. Ported Subwoofer Build Projects
    I had this sub from a tuba ht, and decided to build a new smaller box for it (9.87cu ft) with 2 4" ports that are 15.5" long. According to winisd it would have been tuned at 18.8hz and whatnot. Anyways, after about 5 minutes the sub exploded and I think it has voice coil issues, so I am...
  2. Sealed Subwoofer Build Projects
    My Amp seems to be rattling a lot and it seems 2/8 screws are stripped and do not go in correctly Any Ideas of a Solution to this problem, Might had just been shaking near by items in my room also. I could try moving stuff BASH 500http://www.parts-express.com/brand/bash/359 DIY Stereo integrity...
  3. SVSound
    i have the above mentioned sub. It has the upgrade 12.3 driver but it bottoms out. i have the O audio 500 BASH amp. Is there an aftermarket driver that i can drop in that wont bottom out? maybe i have the amp set wrong and cant find any info on the best setting for the amp and this sub. plz help.
  4. Home Theater Receivers | Processors | Amps
    I'm getting a little tired of dealing with handshake issues between my Onkyo SR876 and my Panasonic DMP-BDT500. It was working fine for the past 6 months and now it won't recognize the audio only HDMI signal. The BDT500 has dual HDMI outs. I connect one directly to the TV and the other to the...
  5. Home Theater System Recommendations
    Recently found a pair of these at a garage sale for $30! My excitement got them into the car and off the lot before I could take a close look but it appears that the drivers have been replaced with common 8 inchers. An idea on where I can find something closer, if not a perfect match, to the...
  6. DIY Subwoofers - General Discussion
    I'm looking to replace the 15" adire audio tempest driver I've been using for the last 10 years. The enclosure is 194 liters (6.85ft3) tuned to 18.8 hz with two 3 inch flared ports with a center section of 5". I'm using a Reference Gallo Sub amp bridged to mono that produces 650 watts into a 4...
  7. Headphones | Head Gear
    Grado has changed from their original pad design - the "donut" design - to a design that covers the transducer - no donut hole - on some of their lower priced models - SR60i, SR80i, SR125i. The new design is called the S-pad. The new design cuts the highs a bit, which some users object to. The...
  8. Home Theater Receivers | Processors | Amps
    Hey guys, It seems at some point in the past year i lost the audyssey mic, that goes with my Onkyo 808. Doing some research it seems that the, Audyssey ACM1H mic will work as a replacement. Is this the right mic to use to run audyssey with the 808?
  9. DIY Repair and Maintenance
    My amp blew and I need a new one. The sub has an 11x11" cutout and I can't seem to find one that will fit. Any suggestions?
  10. Sony
    Hi Leonard and all, All my family and friends who wanted big screens have them now 8-> and I've been working a lot so I haven't been big screen playing lately. Tonight I'm working on a Sony KP65WS510 and I found PS5001 is bad. It's a pico fuse over on the G Board and the manual says it's a...
  11. Remotes | Cables | Accessories | Tweaks
    I have an Onkyo TX-807 that has been a solid performer, other than the replaced HDMI board which they did for free. As with all remote controls made to low standards the silicone pads have broken down. I have resilvered the contacts once already but at the risk of damaging furniture out of...
  12. Creative Sound Solutions
    I own an Audio Pro B2-70, containing (2) 8" woofers. Recently, I replaced one of the woofers with an Infinity 860w 8" woofer. But,when I connect them both, I get a strong push/pull motion with no signal applied. Please explain this to me. Also I have an Outboard Design Acoustics PS-103 10" sub...
  13. HDTV | Video Displays | Processors
    Hi all, My 8 year old Sammy HLR-5067w died this week. One or more of the boards have given up the ghost and so I'm looking for a replacement. I'm looking for a 1080p in the 55" range. I've decided that 50" is too small and 60 is too large for the space. I'm looking to keep it under...
  14. Home Theater Receivers | Processors | Amps
    I have add this unit for about 2 years and would like to stay with Onkyo but want to get the most bang for my buck and not shell out the same costs I did originally on a new unit, what models would you suggest? I admit I probably don't take advantage of most of the features in my current unit...
  15. Home Theater Receivers | Processors | Amps
    I've had a NAD T773 A/V amp since 2006 and now it constantly trips it's internal breaker and "pops" the speakers when it shuts off. Sometimes it turns the flat screen off when the sound goes. Regardless I don't think it's worth paying the $$$ to have it repaired. So I've been looking at a...
  16. Home Audio Speakers
    Hey there, I'm looking for some guidance on how to go about fixing my Klipsch KG 1.5's. I picked these up two months ago at a pawn shop. They've got a myriad of cosmetic scratches, and they don't have the grilles, but they sounded excellent. A month or so after I got them, one of them...
  17. Home Theater Projectors
    OK. I bought the Epson 8350 Powerlite Home Cinema 8350 almost two years ago and the bulb went out with a bang last night. How long should it last? Not even two years seems awefully short for such an important component. Any suggestions on where to buy a high-quality, compatible bulb or...
  18. DIY Subwoofers - General Discussion
    Hello All, Hope you all had a joyous holiday season. I built a pair of sonosubs around 10 years ago (one for the pa-in-law) both equipped with an Adire Audio Tempest (original 15" not MKIII or XBL-2) driver running off of a Adire's 350w plate amp. The sub has treated me very well but I am...
  19. Home Theater Projectors
    I am shopping for a new lamp for my Panasonic PT-AE 4000. It seems that the net is full of vendors, and most claim to be authentic resellers, or suppliers of OEM lamps. And yet most warn of the other guy selling fakes and copies and cheap knock offs. Does anyone have a vendor, preferably...
  20. DIY Screens
    Hi, First of all thank you so much for the invaluable info that folks have contributed on these forums. Really helpful! I own an Epson PowerLite Home Cinema 720 projector (720p and claims to deliver 1600 lumens of Color and White Light Output at 1280X720 resolution). I'd an 92" Optoma...
41-60 of 158 Results
Top