Home Theater Forum and Systems banner
req
1-16 of 16 Results
  1. REW Forum
    atm you can copy a trace using (A+B)/2 but the copied measurement is left with ref time of t=0 no matter where the original traces are. It would be nice if this were set automatically and/or an explicit copy option were added that avoided the need to use trace arithmetic at all. On a related...
  2. REW Forum
    I've been using an accelerometer recently like this article - http://www.audioxpress.com/assets/upload/files/George%20NtanavarasAccelerometer.pdf Based on this experience, there are 2 features that would make this easier in REW 1) allow the user to specify the input sensitivity directly, e.g...
  3. REW Forum
    I was attempting to generate some band limited white noise today and noticed that it can only go down to 10Hz. Is it possible to extend this? 5Hz would do, 1Hz would be great though
  4. REW Forum
    I have a couple of feature requests 1) increase the no of decimal places in the window box for ref time to 2 (or 3) decimal places 2) add a feature that lets you enter a ref time and then REW will automatically move each measurement so that the detected ref time is moved to that point in time...
  5. REW Forum
    I have 2 suggestions that come directly from Holm but do make that app a bit less fiddly to use (for speaker design use) + 1 other suggestion I've dreamt up 1) provide "curtains" on the IR that you can drag left and right to set the left/right window positions 2) provide an "auto detect" window...
  6. REW Forum
    Hello everyone, I have a mini project studio in my house which I work out of. I know my room isn't perfect but know it well and am able to get mixes that translate well enough for me. However I'm always up for learning something new so have decided to have a go at the scary world of Room...
  7. New Member Introductions
    Hey hey hey! I'm in Johnson City, TN, USA. I'm a help desk geek by day, and a toddler wrangler by night. I'm into ecigs, gadgets, and music containing more than 3 or 4 chords -- but not so much a-modal / dodecaphonic (Schoenberg, etc.), unless it's accompanying a good thriller flick.
  8. REW Forum
    I have made some measurements, and I think I have rather long decay times in my room, and some peaks and valleys in de frequency response. I have measured with the subwoofer in a corner, and along a wall, there does not seem to be a big difference between the two placements. I have also...
  9. REW Forum
    I'm building a custom custom DSP based on cascading biquad IIR filters and would love to be able to extract the filter coeffs from the EQ plugin in REW. Ideally I would love if REW could generate the coeffesients and export them, but I understand if that is a bit technical. How is this done for...
  10. DIY Speakers
    I really want to get a table saw, But there is no way I can store one in my home, even a collapsible one. The one I was drooling over is the Porter Cable 220 at Lowes. But since that is out of the question, I am looking at the Festool TS55 REQ track saw. It is a specially designed circular saw...
  11. REW Forum
    I would like to use REW to plot the amplitude response of an audio processing device (BSS Audio SoundWeb). Because it is digital, and the audio passes through A/D and D/A converters and there is some amount of delay. After calibrating the sound card with an analog loopback, I run an SPL...
  12. REW Forum
    Hi All, Looking for a FREE VST EQ for 2 ch music that allows importing from a Filter export file made in REW EQ Room Software. Regards, Ron.
  13. Classifieds - Equalization & Calibration Equipment
    SOLD! SOLD SOLD! After many years of satisfied ownership, I am finally selling my BFD setup. It took an equalizer 10X the price to displace it. THIS IS A SETUP WITH A MIDI INTERFACE FOR EASY AND QUICK PROGRAMMING! ALL YOU NEED IS A SOUND LEVEL METER (and a computer with appropriate soundcard)...
  14. REW Forum
    Hi, first let me say thank you for this fantastic program! I would like to know how long actually the gate time is when measuring a frequency response. For example if I do a 1 MB sweep from 30 - 200 Hz (23.8 s) ... how many data points are that and how long is the gate time for each? The...
  15. REW Forum
    I use a DEQX to PEQ my front two speakers and to perform crossover duties between my L/R mains and subs. I use REQ to determine PEQ settings. The extra digital processing inserts a LOT of incremental time delays (could be 38ms) for my fronts and subs that all the rest of my speakers don't...
  16. REW Forum
    After much nashing of teeth and late nights I have managed to find the right memory for my PC, loaded up the REQ software and made all the physical connections. I am running the Hsu VTF-3 HO w/turbocharger through an Onkyo TX-SR573 receiver. Crossover is set at 80hz. My main listening room is...
1-16 of 16 Results
Top