Search Results for ‘reset’

Hi, I have a Samsung DLP HLR5667w. I replaced the section containing the inputs (HDMI, VGA, all the component connections, etc.) because the HDMI input was not receiving signal. Now it's receiving signal, but since I everything has been connected, my resolution on the monitor is off. Where...

Help please... My parents called and said their tv wasn't working. I stopped by and found their lamp in their wega Sony tv had went out. I ordered one off of amazon and when it came I took it to their house and put it in. When the tv still wasn't working I googled the issue and found that I...

Hi all I have a DSP1124 in the rack that I bought second hand, I'm not sure of its current settings. Is it possible to reset to factory defaults?

I have a Marantz SR8002 A/V Receiver. I plugged in a mini-jack to the Aux 1 Input while it was hot and triggered the protection circuit, shutting off the receiver. I've done some basic resets and tried a couple I saw online, but the display on the front of the receiver is still off. Everything...

So i am buying a used 1124 to help eq my sealed subs and boost the low end and wondering if there's a reset button to erase everything back to manufacturer settings? thanks,

Hi all, New to REW and this site. Trying to use it to analyze my room. I'm on a Mac Pro, I've been trying figure out how to calibrate sound card and get an AT4050 into sound card. To no avail. (I have Radio shack spl meter,digi003rack,UA la610, JBL monitors spidf from 003, and getting a...

Overall I love this player (far from perfect - lots of things but wish there was some setting or fix for the frequent "screen refresh/reset" I'm seeing almost every time I quit from a BR/DVD disc. (maybe I'm wrong but it seems worse about this since I updated to the 108 firmware - but I could...

My 705 remote works sometimes and sometimes not. I called support on Thursday and the guy told me to push a couple of buttons together (receiver and set up, I think?) and it started working again. Now it stopped again. The problem is that my 1 year warranty expires today, April 1st and they...

rear projection CRT fails to turn on and after resetting again fails to power on and refuses to leave standby mode, it does reach standby mode. Checking the board a 5A fuse, (fu-206), is blown and gets reblown upon replacement. After reading around on avsforum, here, and a couple other places...

Just took it out of the box where it had been waiting for a few months before the HT was complete. Picture great, no complaints and we watched our first movie. But it was with the speakers all putting out the same sound, no surround or anything. So I started playing with the options for...

I have a Mits model 55819 that just shut off for no apparent reason and will not turn back on. It is around 7 years old so since it is out of waaranty, I took the back panel off and looked for a blown fuse. The fuse was fine so I am in the "dark" as to what is wrong with it. I have been told it...

Panasonic PT-50lc14 50" HDTV I installed the new lamp but how do I reset the meter so that it doesn't pop up every time I turn on the TV I do not have the original remote if that maters. Thanks for the help

How do I get the unit back to factory defaults? I checked the manual, but couldn't find. I am getting ready to EQ my new subwoofer, so I need to blank it all out.