Home Theater Forum and Systems banner
resistance
1-5 of 30 Results
  1. System Setup and Connection
    Hello! I am very new to all of this; just got my own place after graduating. I bought a set of samsung speakers (5 speakers + subwoofer) from a second hand store about two years ago pretty cheap with a mind to use them once I got where I am now. Yesterday I found a pioneer receiver at a local...
  2. REW Forum
    I need to measure the Thiele and Small parameters. I calibrated my sound card. I calibrated my measure. I use 50g playload (mms= 100g) Uses resitances in my soundcard inputs, an amp and a resistance of 16 ohms Rsense. I tried different resistance value. It's still the same error. RE My hp fact...
  3. REW Forum
    This is a little puzzling... voice coil measures 3.7 ohms, but I have to enter a value of 3.3 for REW to calculate TS parameters, and REW spits out Re of 4.06 ohms, which seems high? Any ideas if this is an issue with my test rig?
  4. Sony
    I bought a yamaha A-S700 amp at the end of 2012. About a year ago i tested the resistance coming out of the amp with a multimeter. The resistance of the left channel was around 0.9 ohms. But the resistance of the right channel was sitting at around minus 7 ohms. I tested the resistance again...
  5. System Setup and Connection
    I am working on a project where 60 small 8 Ohm 0.1W speakers will be playing music from a live DJ. The majority of the sound will come from the pair of JBL 15" loudspeakers but i would like some of the sound to come through the small speakers. My concern is that if i run the amp with only a...
1-5 of 30 Results
Top