Search Results for ‘results’

Hey, I’m new to REW and am learning every hour. In my situation I have to run java for now as I’ve tried every suggested troubleshooting but cannot get asio to recognize my hdmi connection. So I’m running my umik and denon 1400 with java for now. I am in the process of measuring speakers...

Hello all, my name is Gaetano, from Italy. I'm an electronic engineer and I've a "medium" recording studio in Naples. A few days ago, I decided to re-perform some measurements of my speakers, Yamaha MSP7 studio, in my control room, taking also the opportunity for comparing the MSP7s with the...

I have recently setup my audio equipment into a new room and have taken a few measurements and the bass is all over the place. I was just wondering if anyone has any ideas as to what is going on. My mic is a UMIK-1. The red line is the subwoofer facing sideways at half volume level, the blue...

Hi, Since this is my first measurement with REW I would like to take the opportunity to discuss the outcome. att. are a picture of my living room, and the test results. I use a beginners set-up with a basic SPL meter voor calibrating. ECM8000 from behringer with .cal file provided by...

I followed through the detailed tutorial by AustinJerry that I found on avsforum to get my REW system up and running. I also watched through several hours of videos on youtube about REW, acoustics to try to understand what the graphs mean. Components: Umik-1 Windows-7 Laptop Yamaha RX-A1000...

So I received a miniDSP UMIK-1 for Christmas and wanted to take some measurements in my home theater room. I read through the long manual for REW and I have to admit that about 95% went way over my head. No big deal, I figure I start easy and basic. I should probably explain my setup. It's a...

I have completed my first REW tests. It looks to me that my major problems are the 2 nulls at 90 and 500 (with maybe a whole other bunch of problems) and the bass ringing <80 on the waterfall chart. I could be COMPLETELY off, so any feedback is welcomed. Any ideas? I know my gear is not that...

Hello, after many hardships and the multitude of questions raised in various forums I've just made the first measurements. Unfortunately, still I'm far from the first attempts to adapt, because it's found out that I totally can not interpret the results (graphs). I don't understand them...

Long time listener, first time caller. I'm getting into modeling subwoofers for the first time. I have done a bit of research and might know enough to be dangerous (probably in a bad way). I'm detail oriented and want to understand why I'm doing what I'm doing. I'm a mechanical engineer...

I just finished testing (WT3) 4 of the out of spec LD25Xs that were sold on Ebay a while back. The Fs (720-834) and Re (6.8-7.1) seem to be fairly close to the OEM specs but the Le is about 10x higher at .10. Hopefully someone can look at the data and help me understand what I should expect from...

Now that I have my Dirac Live Full w/ my XMC-1 I wanted to give some input. First of all. Review the chart to see the response. Since my X4000 is down I used a previous test however nothing has changed meaning I ran each in my room w/o treatments. Obviously the Audyssey is a base target...

Hello, I'm a music production hobbyist and recently took some measurements to assess my room at the listening position for my near field monitors. My apologies for not posting a graph, but my .mdat is attached. I think the frequency response looks pretty good, but I'm not sure how to assess...

So today I calibrated my TV Sharp 40LE820 (at least tried) , but still new to using a i1display pro and HCFR (+i1profiler which I didn't use this time). Gamma I know is not perfect, but it is as close as I could get it, well everything is as close as i could get it. But, the RGB levels are...

Hello everyone, I have a mini project studio in my house which I work out of. I know my room isn't perfect but know it well and am able to get mixes that translate well enough for me. However I'm always up for learning something new so have decided to have a go at the scary world of Room...

Something I don't quite understand is why I'm getting such significantly different measurment result with the different sweep length, I expected these to be similair. I thought it might have had something to do with the impulse time due to room accoustics, so I shortend this but with little...

Hi, I would be very happy if someone could say something about those results. My room is pretty similar as this: http://acoustipro.com/ebay/listingimages/1362591384.jpg And here is my REW results in 1/24 octave: http://s13.postimg.org/o1g0c33d3/response.jpg...

Hey guys. I'm coming with a lot of upfront info and have seen great results so far. I'm curious what I need to be looking at or looking for now to continue taking things to the next level. So my wife and I recently moved into our new home in Texas. I have a dedicated movie room but it's...

Hello all, My name is Garth and I probably know just enough about REW to be dangerous. I’ve spent a good portion of the day generating ~25 frequency sweeps trying to optimize my new subwoofer integration with my main speakers for 2 channel audio. My sub is a Rythmik E15HP so many of the sweeps...

finally got to a good test... very happy that all 5 of my NHT speakers produced even results on all 5 channels. It appears my HSU sub with room gain gets down to 12hz by the look of this. I had the volume set to -5db where my spl meter read 85db. ran a sweep and this is the average. I need...