Home Theater Forum and Systems banner
rme
1-15 of 15 Results
  1. REW Forum
    I calibrated the RME BabyFace Pro sending on Ch1 input a logarithmic sweep (volume: -12dB) generated via Room Eq Wizard at the BF PRO output (loopback sweep). I experiment instabilities (+1.4 dB to -43 dB for 20 Hz to 20 kHz) for a buffer size of 32K (sample rate: 48 KHz). The mic input is not...
  2. REW Forum
    Hello, I'm new to REW I've made calibration for my RME fireface 800 (loopback from OUT8 to IN8) but result it's not what I expected. Please see the attached pic: HF roll off starts at 1Khz and almost no roll of on LF any help?
  3. New Member Introductions
    Hi everyone, I'm new here, and a new REW 5 user, running on OSX 10.8.5 Just tried to generate a calibration file this morning before starting measurement to increase my home studio acoustics before starting to mix the new KARL W DAVIS AND THE SWEETPEAS EP. The signal goes out of my RME UFX...
  4. REW Forum
    Here are my questions, if anything has been covered, please direct me to a link. Thanks in advance! 1. DBX RTA-M....use generic calibration file? I know having it calibrated specifically for my mic would be best, but just wondering if you would use the generic cal file or as is. 2. While...
  5. REW Forum
    Dear all, I have some problem setting the input channel with a RME fire face UC, I can not route any of the input channels to REW, tried all the suggestion... with the output everything ok macbook with OSX mavericks and REW last beta and RME updated drivers any suggestion? Best regards Stefano
  6. REW Forum
    I've just spent an hour trying to get sound in or out of REW with my RME card and got absolutely nowhere. I tried both Java and ASIO but when trying to calibrate, REW does not generate any tone. Using ASIO, the onscreen level meter stays at -99db and after a few seconds I get an error of "The...
  7. REW Forum
    I am calibrating my soundcard with REW and all my calibrations are heavily distorted and unusable. I have been using the tutorial and it looks to me that I am having some feedback problems but I have no ide how to solve them. I cant seem to finde anything that resembles input monitoring but I am...
  8. REW Forum
    I wanted to see how my RME Multiface audio interface compared with my MacBook Pro internal sound card, so I calibrated both, set up my system, and took measurements at each ear position with 23.8 second sweeps per measurement. The microphone was a B&K 2270, using the headphone output to each...
  9. REW Forum
    I managed to get hold of a B&K 2270 for the weekend and have been seeing which of my budget microphones gives the most similar frequency response. Here's what I got: - The audio interface was an RME Multiface. My other microphones were all over the place, but the built in microphone on the...
  10. REW Forum
    Hi Folks! When trying to set up REW on my macbook pro with RME FIreface 400 i noticed that the input levels i get in rew are much lower than what i see on the FF400 mixer. If i see -25db in the mixer rew is only hearing at -63db... Also, if i do a measurement REW is telling me that the input...
  11. REW Forum
    Hello, i have understand that REW dont work with Intel Macs and Firewire, because the problem is Java. Okay, i have start my Windows 7 Home Premium32 bit Laptop, install the new Driver and all dont work. I can set the Properties, but i cant play a Track or Radio on Windows Media Player or...
  12. Pro Audio
    I've got a hardware conflict I'm trying to resolve - everything was working smoothly until I connected a control surface to an older set-up using MIDI, for which the control surface didn't do so well. The newer outboard items really seem to like USB much more. Anyway, after experiencing some...
  13. SPL Meters | Mic's | Calibration | Sound Cards
    Hi again. Having configured and measured the Presonus Audiobox USB, I would really like to use my RME Fireface400 as I believe it is a much superior product. However, I'm having some trouble configuring the unit to work with REW. Here's what I've done so far: 1. Selected the Fireface400 as my...
  14. REW Forum
    Hello, this is my first post :wave: I'm in the process of treating the CR of my recording studio, and stumbled across the REW while looking for info on accoustics. It seems like a great application, and I have worked with similar types of software before. I'm curious if anyone is using REW...
  15. REW Forum
    Hello I`m trying to calibrate my soundcard and get a very monotone signal similar to the one described in the help text as an issue with loopback There is an option to turn on/off direct montoring in the rme panel but it doesn`t seem to make any difference any ideas? Thanks
1-15 of 15 Results
Top