Search Results for ‘rotel’

Following several years of detailed development, Rotel Electronics has unveiled a new sharp looking preamplifier and surround processor. The 7.1 channel pre/pro is loaded with high-end touches, but carries a relatively modest high-end MSRP of $3,499. Today we’re previewing the RSP-1582 and...

I have been ignoring this for awhile, just writing it off to my use of a vintage Rotel unit to power my desktop system (Mac Mini => optical out => Audioengine D1 => Rotel RV - 555 => high level out => Pinnacle Subsonic => PSB Image B4). When I turn on the Rotel, I get this hum/crackle that many...

Hey everyone, I need some help - I'm in need of a good recommendation for my HT system. Currently I have an Onkyo TX-NR3007 receiver where the HDMI output has quit working, so I want something new. I'm currently running a Rotel Amp (RMB-1075) running B&W DM603 S3 Floor speakers (with matching...

Hi, I need some help figuring out this processor. I looked at the manual but I need a second opinion as it is very confusing to me. http://www.rotel.com/content/manuals/rsp1068.pdf If I select Small options, it says it will apply a low pass filter to the subwoofer and to the main speakers...

Hi, is it possible to integrate the EQ Settings for the parametric EQ of Rotels Pre Processor RSP-1572 in REW? That would be awesome! Here are the required Settings! Frequency Step Default Band 1. 20-80Hz. 1Hz 40Hz Band 2. 20-80Hz. 1Hz...

Hello everyone, I'm a first time HiFi owner with a pair of 683s and a Rotel RSX 1550. The purpose of this thread is to find out how to better maximize my use of that system without purchasing more stuff. I worry my 683s (200w peak) aren't performing at their best with only 100Wpc driving them...

Recently, for no particular reason, the left channel on my amp has stopped working. I've checked the speaker cable and the speaker and these are working fine. It a complete mystery and I was hoping some could enlighten me as to why this is happened.

I have a buddy selling a "NEW" still in the box Rotel RSP 1066 for $275.00. I'm not sure if I need a surround processor and amp or just a decent A/V receiver. I feel at the cost of the 1066 and a decent amp I may be able to get more power then a receiver for the same amount of money? Any...

Hey, anyone own or have knowledge of this particular Rotel 2 ch amp? I was about to purchase one and the only info I can find is a brief owner's manual that had only the most basic specs, and no maintenance info or otherwise. A picture of the innards shows a large toroidal transformer along...

http://www.avhub.com.au/index.php/News/Hi-Fi/rotel-rsp1580-surround-preamplifier-processor.html Very strange things here. This big processor was shown 2 years ago, but was postponed ever since. Earlier this year, news came that it was aborted. And now it's released anyway in Australia? Paging...

Hi, I'm planing to set up 7.1 or maybe even a lesser 5.1 (depending from your advice) home theater with a good stereo quality option. My dedicated room area for the setup is around 6m long and 4 meters wide ( while it does have couple of more meters on the right side and almost fully windowed...

Hi I am redoing/updating my existing custom cabinet home theater to a new High Def LCD 55" flat screen.Verizon installed the HD box and connected it to the new TV .So at this time the sound is not connected to the surround system,and just coming from the actual TV I now want to...

Has anyone had the opportunity to compare the Emotiva UPA-2 to the Rotel RB-1562 amp?

Hey guys, I have a Rotel RX-975 but looking for a cheap remote. Is there a list of compatible Rotel Brand remotes for this receiver? Or what remote would one recommend? Also I have a Sony Universal that is said to work but when programmed, it does nothing.

Hey guys, so lately my left channel has been not working but usually I can turn it off then back on or standby it and unstandby it and it would be ok. Well today it is not working almost entirely. Is there a likely component that is going bad for this to be happening?

My system for Bluray playback for a couple of years now has consisted of a Rotel RSX-1550 5.1 AVR with a Sony PS3 game console. I was getting normal Bluray audio sound out of it on all six speakers, the fronts, center, surrounds, and subwoofer. When playing a Bluray disc, the Rotel would...

I have a Rotel RSX 1065 and I moved it into another room recently. I've been unable to get audio to come out of the front speakers but the subwoofer is working fine. I am using optical 1 as an input and pcm 2ch as output. I've also been having an intermittent problem where the audio and...

Used $200, Im assuming this is a good deal as they are going for twice that on ebay. Would this benefit me over using the onkyo 3007 internal amps? Is rotel a good name? Im a complete rookie at separates, any input would be great.

While I am deciding on a receiver (and getting help on another thread), on a friend's suggestion, I decide to also add an amp (1st ever) to my setup. I am looking at a new Emotiva UPA-5, used Rotel 1075 and used ATI 1505. Both the pre-owned 1075 and 1505 will be about $150 less than the UPA-5...

I picked up this unit on ebay a little while back and while it powers on and plays quite nicely (very nice - in fact), it is pretty dusty and a little beat up. The main unit chassis is a little loose. I was thinking of having a qualified tech take a look at is and repair anything necessary (got...