Search Results for ‘rss390hf-4’

This is my 1st sub so I just wanted to get a reality check and see if I'm not doing something wacky. I ordered parts, they will arrive in 2 days. Plan to start cutting MDF tomorrow. Here is the plan Ported 10.5 ft^3 :eek: Tune 19 Hz Driver 15" RSS390HF-4 Dayton Amp modded BASH 300W (sub...

I know I am doing something wrong, but I don't know what. I am trying to model with WinISD, but when I change box volume, it isn't doing anything that makes sense. I uploaded the graph. When I change my box volume it simply raises or lowers the peak at 17 Hz. The graph looks fine in a 1...

Hello everyone and greetings from 8300 feet in the Colorado Rockies. The research has been completed, in no small thanks to this forum and I'm ready to start my first box build (x2). The finished boxes will be for a dedicated HT and installed as a pair of end tables on either side of my...

I've toying around with the Dayton RSS390HF-4 driver in WinISD. Seems like a lot of folks like these in a sealed box, and I'm thinking that might be the easier way for me to go on my first project. If I model it in a 4-5 ft^3 box, it looks good with 300w; anything more and the excursion goes...

've been contemplating various subwoofer constructions, while making some sketches & calculations I came up with the idea of putting two Dayton RSS390HF's behind each other in a vented box of 150 liter and tuned to 18,5 Hz. Has anyone experience with such a setup? Pro's / cons? ingo

This design is a result of my search for a build that could deliver sub 20Hz frequency content at decent output levels on a budget of less than $500 including building materials and finishing. After a lot of modeling and exploring different options, it is my opinion that there is no better...

... for frequency repsonse and spl in a 4 cu ft. sealed box (100% fiberglass fill) with a given budget of $160 and not wanting to go larger or ported/PR'd? Wouldn't room gain make it nearly flat to 20Hz? The 4 cu ft. figure is 5.7 cu. ft. minus 20% for the 100% fill and approx. .10 cu ft. for...

Hello, I am looking to build a good sub to go along with my Tritrix that I just built. I had been looking at cheaper drivers in the 10"-12" catagory (something closer to the Tritrix quality); but everytime I look at driver specs, I keep leaning towards drivers that, on paper, appear to have a...

First of all I'd like to thank Mike and all the other posters here for the help I've received. There's alot of good info here. I've spent more time researching than actually building. Dimensions 21"x21"x42" 7.9 cuft usable internal volume 6" port 24.75" long Hopefully this weekend I'll get a...

Hi, I plan on building my 1st sonosub with the Dayton RSS390HF-4 15IN. Have any of you used this driver? If so, what diameter sono tube should i buy. I would like a tuning freq. of 16Hz. Thanks for your help.