Home Theater Forum and Systems banner

seconds

  1. Factory Seconds: LD22C tweeters $40 a pair

    Creative Sound Solutions
    They are exactly the same as the units selling for $70 a pair except for the following! They have a slight crease in the flange which is not photograph able, nor measurable with a micrometer and can only be seen if you look carefully and try to get the light in a certain direction. We believe...
  2. Sweep late by seconds on Digi002 in OS X

    REW Forum
    Hi, I've gotten my Digi002 recognized by REW using the LineIn & Soundflower trick. The problem is that the sweep audio seems to be late by about 2-3 seconds. So when i do the soundcard cal, I get the "impulse peak is not where it should be" because REW is reading 2 seconds of silence before...
  3. PT-AE4000U shutting down to stand-by after a few seconds

    Panasonic / Technics
    Hi, Have searched the forums but can't find this one addressed (except something similar from 2010). I just inherited a PT-AE4000U which I was excited by... but on powering it up I get a few seconds of projection before the unit shuts itself down into Stand-By mode (with no other warning lights...
  4. Pioneer VSX-710 goes pop and turns off for two seconds

    Home Theater Receivers | Processors | Amps
    I have a Pioneer VSX-710 which is about Ten years old & it has started going pop and shutting down for a couple of seconds, while watching TV or CD/DVD, and then comes back. I have searched and can only see a few similar problems, one was labelled as CD data corrupt? and the other was speaker...
  5. Mitsubishi WS-55807 red conv. problem for first few seconds

    Mitsubishi
    I have a Mitsubishi WS-55807, about 7 years old. A problem just delevloped when you first turn it on the red convergence is off. Basically about 1" lower than it should be (double text, bad pic). After anywhere from 5-30 seconds it just fixes itself. Been doing it for about a week now. Any...
Top