Home Theater Forum and Systems banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 248 Results
  1. Home Theater Receivers | Processors | Amps
    what should my gain knobs be set at for the xls 1002 connected to the outlaw audio 976 receiver with 4V xlr Pre Outs an speakers with output 98dB sensitivity an channel output level is set at -6db ,on my xli 800 the .775 setting mode made somethings sound distorted the 1.4 setting sounds a...
  2. Ported Subwoofer Build Projects
    anyone know what use 'transmission line' model for port simulation setting in advanced in winISD means? i notice i get a way different response with my 3 cu ft single 16x7cm square port 15 in sub box (basically a tl606 design from an old gallien kreuger cab i dont use) with it checked i get 3db...
  3. HDTV | Video Displays | Processors
    A new tool for owners of 4K/UHD/HDR televisions and projectors has been announced! I have been collaborating with Ryan Masciola, of Diversified Video Solutions, LLC., producer of the UHD/HDR10 display calibration program, for the substantial revision of his suite of test patterns and a soon...
  4. Home Audio Speakers
    whats the best crossover point on these BIC Venturi DV64 an BIC Venturi DV84 i prefur 70hz on the BIC Venturi DV84 that are in the front of my setup an 50hz the BIC Venturi DV64 that are in the rear of my setup but im having trouble tune the eq for them their too bright for my ears iv got...
  5. System Setup and Connection
    I just finshed setting up my hometheater/computer/desk in my bedroom and am having trouble with the optical output. My tv only has 1 optical output and no analogue outputs for audio. I am using a denon receiver that has an optical input and no optical outputs. Also, digital signals are not...
  6. System Setup and Connection
    I apologize in advance if this is in the wrong place or if it's a repeat. I did some searching and did not find what I was looking for. I am using a Pioneer sc-lx801 in a 5.1 configuration. I start with full auto mcacc. It sets up my speakers as large. I change them to small with xover at...
  7. Home Theater System Recommendations
    Hello there... I am new to this forum and trying to set up my Home Theatre, and would like some feedback on the surround system that I need. To provide a clear scenario I have got a Yamaha HTR-5069 receiver and I am planning to get 2 In-ceiling speakers to cater for Dolby Atmos. What I am...
  8. System Setup and Connection
    Hello, new to the forums. I have a question in regards to correctly setting up my surround sound. I use Sling TV, watch blu rays, etc from Xbox 1 and just want to get surround sound. I have no clue where any of the HDMI cables go to and from where. I guess I'm just asking for step by step...
  9. REW Forum
    Hello all! First post, searched for hours to find an answer but couldn't find; I want to measure my studio, hooked up an UMIK 1 mic to my mac pro 5.1 HDX rig but am stuck to only measuring Left, Right, Subwoofer. Is there a workaround to measure my 5.1 setup, speakers individually? I tried for...
  10. Home Theater System Recommendations
    hi all i am after putting together a 2nd system using two r55ti fronts r56ci centre and two r55ti as rears as well and either two r5bi as extra rears or two e55wi surrounds in peoples opion what woul;d be the best optiopn as extra rears and four tm-815 in ceiling speakers for atmos and a denon...
  11. Home Theater System Recommendations
    I am in the process of deciding which equipment to purchase for my home system. All of out previous equipment was flooded in the Baton Rouge flooding in August. Below are some of the items we have looked at. We already have a 65" Sony Series 9 TV that we will wall mount. 1. Marantz 9.2 channel...
  12. System Setup and Connection
    Hi everyone! I'm new to this forum and stumbled across if while looking for info about how to set up my Apple Tv. I have a Denon avr-4308ci and a 3rd generation Apple Tv. I am able to get it hooked up, thats not the issue. What I can't figure out is how to get the audio to play in zone 2 and 3...
  13. Home Audio Acoustics
    Hello, So we just bought a new flat and I can use one of the bedrooms as my studio for DI recording and mixing in stereo. I have pretty free hands with the room, the only exception being that we need most of the space in the wardrobe that is in there. The wardrobe can be moved however. I have...
  14. REW Forum
    Hi Guys Great forum. I have been lurking for some time, but not really posted/replied as I really do not have the knowledge to make any meaningful contributions. But I am stuck…. I bought the minidsp UMIK-1 I followed the UMIK-1 setup with REW - below...
  15. System Setup and Connection
    I recently purchased a new flat screen TV to replace my old CRT type. For years I have been using a AiWA CX-NA30 bookshelf system (purchased around 1997) to enhance the audio of the old TV using the RCA output of the TV to the RCA input on the stereo system. Not having an ear or a desire for...
  16. System Setup and Connection
    Hi everyone, I recently upgraded my old Onkyo to a Sony DN850. I am not at all an expert in receivers and am having a few problems...well not problems but issues in determining the best settings. To make it easier, I bolded my main questions....thanks in advance! My setup: Receiver: Sony...
  17. Home Theater Design and Construction
    Hello People! Phaul's first post here. Nice forum and really usefull I think this is the best place to ask for some information. I was club DJ (vinyl) for a long time and now I'm planning to arrange a full multimedia setup, including a 5.1 system and my DJ equipment together in a dedicated...
  18. REW Forum
    Hi all, One question for the REW setting. If I want to know the SPL and Impusel of my headphone system with a UMIK-1 MIC. The noise of my room is 40dB in low frequency and 20dB in high frequency. What level should I adjust in when I do the measurement? I really appreciate it.
1-18 of 248 Results
Top