Home Theater Forum and Systems banner
settings
61-80 of 103 Results
  1. System Setup and Connection
    My Digital/HD cable converter has settings for audio output mode that included an STEREO ADVANCED setting with No Compression, Light Compression, or, Heavy Compression. What do these settings do? Another output mode is TV Speakers. When using any of the ADVANCED STEREO modes the AVR volume...
  2. SVSound
    Hi Just bought a PC12-NDS, imported from norway since there are no resellers in Sweden :D. Now i´m wondering if anyone else is using it with a Denon reciever (i use 2310) and what settings to use? I´m using this configuration (on the sub) at the moment: Single RCA to lowlevel Gain 1/2 way (12...
  3. Home Theater Receivers | Processors | Amps
    Now that I am in love with my 705, after 8 months, I'd like to see what it can do. There are a few menus that I have not tampered with for fear of screwing up a good thing. Like once I did something and I couldn't get any sound because the MultiCH light was on and I couldn't get it off so I...
  4. Subwoofer Amps | High Pass Filters
    I have just finished building 2 15" Dayton Titanics with 18" passive radiators in sono tubes for H/T use and was wondering what others who use the Reckhorn B-1 have their units set to as far as boost level and boost frequency? I use a Behringer EP-4000 for amplification, and have the subsonic...
  5. Video Calibration
    I have my THX certified Panasonic plasma(not ISF calibrated) adjusted correctly using the TV's user controls and the Spears and Munsil test disc.When I put in the WALL E Blu-ray and go into the video calibration section offered on the disc,my contrast setting is the only setting that is...
  6. System Setup and Connection
    I recently purchased the Onkyo TX-SR608 AV Receiver and for the moment using my old Sony satellites speakers and subwoffer which are still in good condition, which I got with the purchase of 'Home Theater in a box' 11 years ago. AV Receiver - ONKYO TX-SR608 Speakers - Sony satellites SS-V150...
  7. System Setup and Connection
    Hi Guys i have had this amp for 4 months now. when im listening to stereo i like to adjust the bass and treble. is there a way i can save this setting ? as every time i turn off and switch on again, the bass and treble are back to zero again. Panasonic Viera 42" Plasma Denon 1910 Arcam CD92...
  8. System Setup and Connection
    I have a 6.1 satellite home theatre system. The center speaker has 4 3-5/8" woofers with a 7/8" tweeter. The fronts and surrounds have 2 3-5/8" woofers with a 7/8" tweeter. All speakers have a response of 80Hz-20kHz. I am using a 12" sub that has a response of 30 Hz to 180 Hz. On the subwoofer i...
  9. Subwoofer Amps | High Pass Filters
    I have an SA1000 driving an SDX15 in a 6.5 cu ft slot port. I need a liitle guidance on the settings for the amp, having never owned a separate amp for a sub. I have it connected via the sub out on my yamaha RXV559 to the line inputs on the amp. Where I get lost is integrating to the rest of my...
  10. Video Calibration
    Long time reader, first time poster with a couple quick questions regarding TV calibration.... First my equipment -Xbox 360 -PS3 -46" Samsung model number LN46a530 - Yamaha Receiver model number RX-V663 -Digital Video Essentials Blue Ray Disc Everything is hooked up via HDMI through the...
  11. System Setup and Connection
    What would you consider a Large and small setting for speakers.. I know my fronts are set to large because they are large 15 inch woofers .. I have everything else set to small.. The Center RSVIDEO is set to small , the side surrounds are pioneers with a 4 inch driver and tweets they are set to...
  12. REW Forum
    I'm using REW and a BFD DSP1124P for the first time. When I set the levels to do the measurements, I have to put my PB13-U gain down to 7 o'clock and the sweep level down to -17 to acheive 75db on my RS SPL meter. The meter is set to C weighting and slow response. My laptop has input and...
  13. Blu-ray | DVD | Disc Media Players
    I know LPCM converts the codec to PCM. Can someone explain to me what the Bitstream setting is, what does it do, and is it superior to LCPCM? Which is better for Dolby True HD and/or DTS Master Audio?
  14. Home Audio Subwoofers
    Hello All, I recently purchased an Energy S10.3 to replace a stock sub that came with a surround package (Polk Audio RM6750) that have. The frequency responses for the satellite speakers and center channels are: 100Hz-24kHz. The frequency response for the old Polk Audio sub was 40Hz-200Hz...
  15. Home Theater Receivers | Processors | Amps
    Hi all, I hope I posted this in the correct place. I am toying around with the idea of moving my blu-ray player (Pioneer Elite BDP-05FD) to my 5.1 analog inputs of my AVR (Denon AVR2105), and my HD DVD player to optical (I cannot find an analog switch at a reasonable price). What is giving me...
  16. Subwoofer Amps | High Pass Filters
    Hey Folks, I have a questions. I'm running dual Shiva-X's off of a Behringer EP2500. This is a 3cuft box which is In-Wall and used for 100% HT only. The questions I have are regarding the Mode Switches on the back. What is the correct setting for my dual shiva setup in HT? Low Cut Filter = On...
  17. AV Home Theater
    I went with a 5.1 system for High Definition TV watching as well as DVD watching. The music concerts are esp. good in DTS or 5.1 Dolby. But what do you listen to your old (or new) music CD's in? I just used 2 speaker mode at first at that is likely what they were first designed for, but my...
  18. SVSound
    Hey guys sub is awsome but haveing trouble seting things up. I have the klipsch quintet III my reciever is yamaha 6160 my auto mic set the crossover to 120htz and that is what klipsch recomends. Will that be ok for my sub does that mean everything below 120 goes to my sub need some help here...
  19. Electronic Processing/Equalization Devices
    I had several filters right where I wanted them. Could have easilly written down the parameters, but didn't think I needed to since they were stored. Excerpt from the manual: "Owing to state of the art circuitry, no internal battery is needed, hence the memory contents will not get lost"...
  20. Electronic Processing/Equalization Devices
    About a year ago I created presets using REW and the 1124P for different sub locations in the room. I saved the REW files associated with the locations, and the .req files that identify the filter profiles. I would now like to move the sub to another location, but dummy me did not write down...
61-80 of 103 Results
Top