Home Theater Forum and Systems banner
settings
81-100 of 103 Results
  1. REW Forum
    OK I think my age is showing now. I have used REW very successfully in the past now I think my brain hurts. when running REW and click find peaks and assign filters should I follow the recommendations and use all of them or concentrate on the low end first? I believe I'm doing it right but who...
  2. System Setup and Connection
    I don't know if all brands of receivers are the same, but on the onkyo, I am curious. If I choose not to go with the audessey, and choose my own settings, is there a certain db level to start with for the front.... center... surrounds...and do I keep the sub at 0db through all frequency range...
  3. REW Forum
    I'm getting somewhat odd results when experimenting with the phase settings on my subs. I have a 12" JBL and a 15" CSX which I stacked so that speaker distance to the mic would be identical. The JBL has a phase switch marked 0 and -180. The CSX has a continuously variable knob from 0 degrees...
  4. Electronic Processing/Equalization Devices
    How do I use the "Retrieve filter settings from EQ" with the BDF ?
  5. Home Theater Receivers | Processors | Amps
    Gents, Yesterday morning our power went out. It has gone out before for longer with no adverse effects, but this time... My Denon AVR 888 settings were all wiped out. Input configuration, levels, distances, everything. Gone. Including all the Audyssey MultEQ data. :hissyfit: Argh...
  6. Blu-ray | DVD | Disc Media Players
    Hello Friends... My system's setup is as follows: A Panasonic 'BD10A Blu ray Player is running HDMI OUT for both audio AND video (that's all that is coming out of the player -- no analog connections, etc....JUST HDMI) to an Onkyo TX-SR605 receiver's HDMI IN (1)...from there, a second HDMI...
  7. REW Forum
    In the help menus under Spectrum controls there is an example that shows: Mode RTA 1/24 octave >37 Hz The help menu tries to explain what the ">37 Hz" means but I just don't understand. As I move the mode up the list, i.e. RTA 1/12, RTA 1/6, RTA 1/3, etc., the > Hz numbers become...
  8. SPL Meters | Mic's | Calibration | Sound Cards
    I guys/gals i had my first try out with said equipment s/b card live24/ B ecm8000 mic/ B mic800 , i only wanted to connect to the sub and take some reading which i never actually did because 1/ i wasn't sure if after extensive reading if i had the connections setup right (but i'm sure it was)...
  9. Home Theater Projectors
    Anyone familiar with the new 720 and it's menu settings? I've only had my projector a few days, went into the menu looking for over scan settings but I did see a menu option called "output scaling" I changed this from normal to larger and now its showing me the entire image, , but also when I...
  10. Video Calibration
    This is a question that I see come up all the time. A user with a new set wants to get the most out of it and asks for someone to provide the optimal settings for their brand and model. Usually, there are folks who will provide their settings and there are also those who will point out that...
  11. HDTV | Video Displays | Processors
    My 50" Sony SXRD (I believe the model is from the "A2020" series, which is discontinued as of now, but was part of their Wega or Grand Wega line) is connected to my theater via an HDMI loop which runs like this: A Panasonic '10A Blu-ray player is running HDMI OUT to my Onkyo TX-SR605 receiver's...
  12. System Setup and Connection
    I probably need to take the time at home to call Onkyo, but I would like to know what you 894 owners have for settings on your AVR & DVD player as in PCM, 48 hz., etc. I just want to make sure I am getting the optimal performance out of this system. Thanks!!!! Bob
  13. Electronic Processing/Equalization Devices
    Recently I turned my system only to find that the amplifier on my HSU subwoofer wasn't working. Upon inspection I found that the power LED would not come on even though I was sending it good power and fuse was just fine. I tried switching it to the manual ON position as well - nothing... I...
  14. REW Forum
    I was wondering if anyone that is currently using this card/amp could post a few pics of the settings in windows that need to be adjusted to get it to work with Windows (which things need to be muted, where all of the monitor settings are, etc.) like others did with the Sound Blaster Card...
  15. Home Theater Receivers | Processors | Amps
    I have an Integra DTR-7.7 AVR and am unsure how to adjust the EQ. It does come with a mic to do automaticly, but i was wondering how does a person do it manuely. What do i need. How much does is cost. Any help would be great! Thanks.:wave:
  16. REW Forum
    In trying to get myself up the learning curve on BFD and REW, I ended up doing some measurements that included application of a 1/1 smoothing function to the resulting curves. Got some wonderfully smooth response curves of course, but they also sounded pretty good. But it's been...
  17. SPL Meters | Mic's | Calibration | Sound Cards
    I just bought a galaxy cm-140 and I'll be taking manual measurements as I do not have REW or access to a laptop. I've noticed on some to the posts that individuals are advised to use the "fast" setting. Is that the case only if you're using REW? The general setting for measurements is...
  18. REW Forum
    Greets, I was comfortable with the prior rev. of REW but this latest version is throwing me for a loop. When I take a measurement, I want my prior-measurement EQ settings left intact so that I can build on them. However it seems that with each measurement my prior EQ settings are lost [so I...
  19. REW Forum
    Is there a special mode i have to put the DEQ in to accept the signals from the REW EQ via the Midi-USB interface? is there another way to do this if not thru the midi interface? here is my setup:
  20. Home Theater Projectors
    do all projectors have the options for the different types of picture sizes? i am really interested in the anamorphic(cinema scope), 2.35:1 ratio. i think my next choice would be the letter box video 1.85:1 ratio.
81-100 of 103 Results
Top