single

Hey guys, thanks for offering such a great forum. I just have a quick question: I'm trying to protect a 3000 dollar projector, and I'm not sure what kind of single socket surge protector I should use. I was thinking about using a long (30+) foot extension cord, and connecting it to my Backup...

hello I made some measurements with 1 sub in a corner, and I got some ups and downs in the frequency graph. When I move the sub to the middle of the wall, it is better, but still a dip between 50Hz and 60Hz. In order to improve that, some people had suggested adding another sub. But if I buy the...

I've been reading about the benefits of dual subs lately. I had my mind set on an outlaw Lfm-1 ex but can't swing two of them. With the Klipsch subs being such a good price lately would I be better off running two Klipsch subs or stick with a single outlaw?

Hi - Continuing to improve two room setup which takes bluray master audio through a 1x2 monoprice hdmi splitter to to Integra dtr-7.8 AV Receivers driving to rooms of 7.2 and 7.4 in my residence. I will use REW to improve the integra based Audyssey calib for music listening, subwoofer count and...

My preamp has Audyssey MultiEQ XT and I am experimenting with it for my studio where I want to focus on just one listening position without compromise. Does it really make sense to take all the possible measurements at places around the listening position? Or would it be better to just take a...

Hey. Thought I'd make a build thread of my new sub beings that I like reading them and maybe others do too. This is my second DIY speaker project, but I'm far from being much good at it. Im still learning woodworking and about as far from an engineer as you can get. I've been reading threads...

Hi All, I have a thread over at the other forum, but thought I'd post here as well. I built two single enclosures with a Dayton RS460ho 18" in each. These will get use in my family room. The enclosures are 21" cubes and after driver displacement and bracing vol.ume, I am hangin right around...

Hi people, I'm looking to Bi-Amp a pair of Tannoy Revolution R2 speakers, and I'm wondering if it can be done with a single receiver... The Receiver is a Rotel RSX-972. It contains five separate 75 watt power amps -- one for each channel (front left, front right, rear left, rear right and...

Using the Motus woofer with the CSS LDX25 tweeter in the custom CSS wave guide. More info coming

YUP.. Had to know if my hands were in the design process a 3 way would come out as well. Motus woofer CSS VWR mid CSS LDX25 tweeter Mid in its own sealed volume with the Motus in the single fold T line. more to come:eek:

This seems like something I should intuitively know, but I am having a hard time understanding the virtues of dual voice coil drivers. Does it have to do with multiple driver setups, versatility, or something completely different?

So I'm looking to build my first DIY sub for my home theatre, I've build plenty of sub boxes for car audio in the long ago past but this is my first for a home. There are so many options out there now that I would love some feedback on some of the ideas I have and figure this thread can serve...

First off I would like to say hello to everyone as this is my 1st post and thanks for any advice you have or will be sharing with me. Now on to my setup. I am a mid 20 year old male 6'3 395lbs that due to some major back surgery cannot work. I dont get much money, so I cannot make some of the...

OK, I'm sure I'm spending way too much time figuring out a first build...have purchased BASH 300 amp and assorted hardware but not yet set on driver. Have had the CSS trio as leading candidate (trying to keep budget around $300 total for build) but the room is pretty big so have been wondering...

I have a 3,500 CF room (16x21x10+) with 6' & 2.5' openings to kitchen and 3' opening to dining room. For mostly music and some HT, I think I need one Rythmik F15HP (600W) or two F15's (370W) or two F-12's (370W). I prefer buying the F15HP but am concerned if I have nulls, I will then want to buy...

This question has been bugging me for a while as I contemplate a possible upgrade to my set up. I did some searches without getting an answer. Since 2 15’s provide a greater surface area that an 18 by about 38% they should pressurize a large room a bit more and go a bit lower. In the real world...

As a neat solution I am looking at a custom 5 channel power amp to power the front 3 speakers in my setup, and an IB which I will install. The amp would be a 5 x 300 watt power amp. This gives me 2 channels with which to power the IB with. Does anyone have any thoughts as to if they think this...

Greetings, Any recommendations on what to get for a single rear surround? I'm thinking of a wall-mounted bookshelf speaker, maybe around $100. Used or new is fine. Based on the helpful advice from folks here, I've started putting together my first home theater/listening room. I've got the...

This is my Box design and Info on what I did with the WinISD. I think it looks good but wanted to make sure. I have the print at the CNC router right now. As long as everything is good then this will get cut next week and built. I have all the components and think the design is good. I will be...

Single 8" in vented cabinet - Finished! About halfway done with this one - the box is together and the components work, so all that's left is the finishing. It's a single 8" Dayton QT210-4 in a 40-litre box, tuned at 35 hz. I'm working with ⅝" particle board. The optimal box size for this...