Home Theater Forum and Systems banner
sonosubs
1-12 of 12 Results
  1. Ported Subwoofer Build Projects
    So I finally will have some time to build my Sonosubs about 6 months after the tubes and drivers have been sitting in my music room. I'm trying to get the details together before I start. I have the Sonosub program and WIn ISD Pro. I'll be using a 24" Sonotube about 6' long tuned to around 15...
  2. Ported Subwoofer Build Projects
    I named these ShoNuff, because who cares. They're 13cu^ft enclosures tuned to 15hz. The sonotubes measure 26" i.d. No measurements yet. I hooked them up to my front main channels to check for air leaks. So far so good. Once I run my wires and hook it up to the amp I will post some...
  3. Ported Subwoofer Build Projects
    Hi, I'm currently gathering materials to build 2 18" Sonosubs for my rec room. The only things that I have so far is a 12' piece of 24" sonotube and a couple Behringer ep2500's (assuming that I would just use a single one), but i'm anxious to jump into this. I currently am running an 18" ED sub...
  4. Ported Subwoofer Build Projects
    Hello, I have decided to upgrade my current sonosub style sub (not actually made with sonosub tubing, but instead metal ductwork tubing) by getting rid of my current av15x and replacing it with a Fi Q18. I then decided that I might as well have two and have them in the back corners of the room...
  5. Classifieds - Speakers and Subwoofers
    Sold woofers - Selling enclosure separate
  6. Ported Subwoofer Build Projects
    Finally I had chance to complete my two, 365ltr 15hz sonosubs... Ports arrived first ($62 each ColloPort-6" sourced from affordabledrivers.com.au [of course] - specifically tuned for the IXL18s at 15hz in 365ltrs). Truly beautiful to behold. Then I got to work measuring and cutting the end...
  7. DIY Subwoofers - General Discussion
    I'm in the middle for my sonotube (Formatube) sonosub build. I just got the tubing today and have cut it to size. However, the walls look very thin - about 9mm (3/8"). The 610mm diameter tubes are cut to 1390mm long each. Should I internally brace them or not? Will the walls resonate if I...
  8. DIY Subwoofers - General Discussion
    I am just exploring options on which box to build for yt TC200. i think I have ready everything there is to read about LLT options....but I have not read anything about sealed sonosubs. Would putting a TC2000 in a sealed sonotube work? I'm thinking it might be worth it to try if I could find a...
  9. DIY Subwoofers - General Discussion
    Hello everyone! First off, thanks again to everyone for the replies to my first thread on hometheatershack. You guys rock! Anyway, the other night, I was reading somewhere (cant remember where though, stupid beer) about a HT setup using 2 subs fed with a stereo signal and how this setup was...
  10. Ported Subwoofer Build Projects
    Well, in addition to the 3.5 cu ft ported box tuned to 24 Hz, I decided to build a couple of LLT sonosubs for the two RL-p15 drivers I bought from Mike. These guys are 260 L (9.2 cu ft) tuned to 14 Hz. I started on them about a week an a half ago and right now they're finished sitting in my...
  11. Ported Subwoofer Build Projects
    A while ago (when they were on sale) I bought two 12" Dayton Titanic MkIII drivers and ordered two 500 watt BASH amps (yet to arrive) with the intent of making two sealed box subs for my HT. Since then I've done some other projects and now have quite a bit of 16" sonotube leftover. So I was...
  12. Home Theater Room Photos (Finished Rooms Only)
    Here are a couple pics of my dual RL-p15 D2 sonosubs powered by an EP2500. I have a FBQ2496 and I'm working on dialing the subs in with REW. Here is a link to the build thread http://www.htguide.com/forum/showthread.php4?t=20113 rightside together
1-12 of 12 Results
Top