Search Results for ‘sonotubes’

Hi guys, I've been on here reading this week and have been getting myself wondering about a diy setup versus my current dual PSA xv15's?!?!. I LOVE my current subs.. and I'm rather certain that they are providing me with reference level playback on all but the very lowest frequencies. However...

Here is where i stand now as i have been reading and thinking and have the time to build. I have 3 tempests available . 2 tempest x and one tempest x2. I have also aquired 3 pieces of sonotube each 24inches x 51 inches .This gives me 12.6 cu/ft each with end caps and speaker volume but does not...

Hey again HTS! I am new to box building as you may know... but I was interested in building a Sonotube enclosure for my sub. The sub is the mfw15 and paired with a Crown XLS 202d on 1 channel. I would like a 18" diameter Sonotube. So here are a few questions I have right now, which port size...

I have two Soundsplinter RL-p15 LLT sonotubes that works really well in the rear center of my room. The problem is my projector is hung there, and the tubes are too tall to fit under it. So I'm going to lie them on the side, and stack them. They need to go on top of each other, like this: 8. I...

Eventually these will be complemented by a TC Sounds ported tc1000 sonotube. But I want to get these drivers put to work. I'm trying out a some small sealed sonotubes to see how they sound. Lack of table saw and space make this the easiest option. The rockwool and sonotube are on their way so a...

So, I have almost completed my new sonotube build. 192L or 6.8 cubic feet tuned to 18hz. Here was after some router work. I was getting the holes lined up for the T-nuts. Oh, and the chairs were not going anywhere, they are anchored. Painted and legs. Port tube. 6" PVC. Almost...

I am looking to extend the extension of my dual stacked 6'cu 19ov.02 sealed sonosubs. I really don't want to disassemble them and add poly fill unless it is worth it so that leaves me with 2-3 questions: 1. Can pollyfill rest on the back of a woofer on a downward firing sono? 2. How much...

Help with sonotube build I'm gonna build a couple of sonotube subwoofers, and would like some advice. Think I'm gonna be using the mach 5 audio ixl 18.2 driver since I live in canada. I've been doing lots of searching on here, and I'm gonna need to use a 24 inch sonotube, with a 6 inch port...

I just finished building my two sonotubes out of the C12.2s I ordered a while ago. I've gotta say I love these 12s. It really makes me want to try some 15s or 18s :) The finish is koana brown from Home Depot with 3 coats of sprayed on poly over it. No build pics cause I accidental formated my...

Anyone ever tried this? Kind of seems like an ultimate solution, but I'm sure I'm missing something.

A friend is a general contractor and had some Sonotubes left over from a job. If anyone is interested, there are six pieces available with lengths varying from 30 to 36 inches. I am located in Oceanside, CA about midway between San Diego and LA. If you are interested and can arrange pickup...