soundcard

So it's been a couple of years since I've played with REW and it's showing. New computer and I can't seem to get a good sound card calibration. I have a simple stereo headphone to stereo headphone jack going from the line output to the line input on the computer. Here is the soundcard...

Issues to look for with Dolby Atmos playback thru PC 8 channel sound-card then back thru Dolby Atmos Pre/Pro using Digital Coaxial RCA's. Is the Sound room mixing lost or is frequency steering of the Dolby recording algorithms recaptured in the final Pre/Pro processing?

what is in peoples opinion the very best soundcard that i can use with the astro a50 7.1 gaming headset for very best 7.1 sound effects thanks

Good day, I can't find an answer to the question how to deconvolve the exported impulse response using the sound card calibration in REW. From my experiments, it looks like by default REW doesn't do it. Here is what I tried: 1) Calibrated the sound card 2) Made a loopback measurement -- the FR...

Newb to REW and miniDSP. Finishing up my diy sub and about to do some testing and measurements. Should be able to figure out everything with all the threads and tutorials but I have a question about my soundcard. Not sure how to find out if my soundcard is capable of outputting the full spectrum...

hi in peoples opion what would be the very best usb soundcard to use with the hyper x cloud 2 headphones for fils games and music

Hi, I wonder if there is a bug in soundcard calibration in the current beta of REW (very cool software btw). Indeed, when I use 44.1k or 48k sampling rates, bandwitdh is truncated around 10k and 12k. However, using 88.2k and 96k, bandwidth goes over 20k. I tested with Arta and it doesn't...

I'm running a Native Instruments Kontrol S4 MK2 as my soundcard. The S4 has two stereo INs, stereo mic IN, and 2 stereo OUTs. When I try to calibrate the soundcard with the loopback, the driver crashes immediately. After a fresh launch of REW, I can start the soundcard calibration and see the...

I am having a hard time with soundcard calibration in 5.15. The high end (>600hz) is crazy. In 5.11 it is basically flat. Any ideas on what I am doing wrong? Running windows 7.

I picked up a focusrite scarlett 6i6 recently and ran a quick soundcard calibration to sanity check performance. The FR looks normal but I don't recall seeing this sort of ripple in the IR before on other devices (or perhaps I haven't looked). Does this look normal? signal is REW -> focusrite...

Hi everyone, I`ve done a new calibration of the soundcard /loop, since I want to perform some measurements with my new equipment. For that I use the HDMI output of my Macbook Pro and as input a TASCAM122 MKII with a EMC8000 mic. So for calibration purposes, I looped the HDMI output to the input...

Hey there im looking for some Infos, if the REW Software runs on an IPad? Could you please help me out? Greetings at21

Hello ! I'd like to measure the spectral content of pieces of music with REW's RTA. My computer is Windows 8.1, and my soundcard is a Tascam US-144-MkII. I've not found the appropriate way to connect the soundcard nor the appropriate settings in the preferences window so far ! Can you help ...

I am remaining out of fashion for media server these days. I have an old shoebox HTPC that has existed in various forms since Windows Vista. Currently it is a low power AMD system that had a Turtle Beach Santa Cruz in it that I liked due to optical out and what seemed like superior input...

Hi can the computers Realtek get in the road of an outboard Pre/soundcard (Steinberg CI 1 ) or does Realtek it have nothing to do with REW. This is a Vista laptop Does Realtek do anything when using a Pre/Soundcard like the Steinberg CI 1? I wonder if disabling Realtek in the Device Manager...

Hi all, welcome to my first day on this forum, and any forum for that matter! I have a Macbook Pro (El Capitan) and a Presonus Firestudio Tube (just updated for El Capitan). Need assistance in basic connection to create the loop in order to calibrate the sound card. I'm getting no input level on...

Hello, did anyone managed to measure absolute delay of signal using two different soundcard inputs (Mic in: Microfon; Line in (as reference): Loopback cabel with signal)? Or is it only possible to use right channel mic in as reference signal (ref in) and left channel mic in for signal...

I just calibrated my sound card, but the curve does look as like one in the REW help. Is there some thing wrong with my card or am I missing a step?

Hey guys, I have not used my Dayton Mic, preamp, BFD, and REW in sometime. I plan to do some measurements after I made some small changes to my system recently. The issue is I am switching the PC I have REW on and forget what all files from previous calibrations need to be imported? I saved...

Normally, I don't have issues with getting things to function properly but this is the graph I'm getting just after the sound card calibration. I'm using a Focusrite 2i4 with REW before I attempt to do anything in my actual home studio for room calibration.