Home Theater Forum and Systems banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 284 Results
  1. REW Forum
    I am an absolute novice but have enjoyed reading many of the posts on the forums over time. I have recently acquired a BFD (1124) but at this time do not have a mike. Given the number of apps available for the iPhone that measure sound pressure levels can I use these as a starting point to try...
  2. REW Forum
    Well, I’m deep in the process of trying to integrate 2 different subwoofers with an existing 7.2 home theater system using a miniDSP 2x4 DSP for the subs. However, that’s not what this post is about. During this process I decided to do baseline measurements of the existing speaker settings...
  3. REW Forum
    I am little bit confused where to start the room acoustic analysis for Home theatre setup. First priority is for low end and the second priority is for mid and high end analysis. My question is Whether to choose SPL meter with line out like galaxy audio cm 140 or linear condenser mic like...
  4. REW Forum
    I am trying to take some measurements of the maximum SPL output of my subwoofer. Problem is REW always shows clipping when setting amp gain anywhere near high power. Is there a method that will allow REW to tell me the max SPL output somewhat accurately?
  5. AV Home Theater
    I’m trying to determine what the total potential (textbook) output would be at a given frequency for a few different Sealed Subs. They will be optimized with MSO, however I️m trying at this point to determine a total potential SPL Here’s what I️ have: All SPL values at 16hz and Max Burst...
  6. REW Forum
    I'm working with multiple windows and it occurred to me that it would be handy to have a key command for 'Unselect All' or 'View Only' so that a user doesn't have to unclick (in my case) 14 windows in order to view just the one i'm interested in at the moment. It may already exist but I...
  7. REW Forum
    A few years ago, I know that REW did not have the capability to log SPL information in real time (say 1S intervals) directly to a text file. Does anyone know if that feature has been added? Would be really really useful for me. Thanks!
  8. REW Forum
    Hi, I bought the Mini DSP UMIK-1 microphone and when comparing the SPL meter in REW to the classic radio shack SPL meter, the REW measurement is 5db hotter. I have the correct calibration file loaded for the microphone, could it be something else? Thanks, Sean.
  9. SPL Meters | Mic's | Calibration | Sound Cards
    Hi All Just wondering now that I see a SPL meter in REW, and we are using good mic's UMIK-1 . Do we still need a Radio Shack SPL meter or can we not use the SPL meter and these mics instead ?
    spl
  10. SPL Meters | Mic's | Calibration | Sound Cards
    The settings is an Android phone connected to earphones through Bluetooth. I need to know the SPL value at the headphone speaker as a function of the sound amplitude (pure-tone) in the Android phone. When the earphones are connected to the jack of the phone, the sound amplitude applied to the...
  11. REW Forum
    Hi! I'm new to rew so maybe it is a noob question but I don't find this problem anywhere in this forum... I'm successfully doing calibration and measurement after that the graph's appearing but with only phase measurement .. nothing else even if I click on spl under the graph.. On the folder...
  12. REW Forum
    Greetings, I am a new user of REW software and am having difficulty with what looks to me to be faulty calibration. Unfortunately, I am too new to post attachments. I am using an 2010 vintage i Mac and its sound card and obtained a reasonable sound card calibration using the protocol specified...
  13. REW Forum
    So I successfully attached a UMIK-1 mic, downloaded the calibration file and the latest beta of REW 5.17 beta 14. I set the mic to unity gain in the audio midi devices and to 48khz input. Since I am a stereo listener I just have two speakers - about 10 feet apart toed in to point to the...
  14. REW Forum
    OK, I use the REW every few weeks and last time I used it about 2 weeks ago my mic and SPL sound pressure meter worked just fine. But now I can't get it to work. I use a UMIK-1 mic and it shows in preferences that is what I picked. I even tried to use the internal computer mic and it still won't...
  15. SPL Meters | Mic's | Calibration | Sound Cards
    Hi guys, noob here, Probably asked a milllion times... I'm interested in getting the Dayton EMM-6 mic and downloading REW for setting up my 2 satellites and sub. I see how I can get all the eq response and comparison levels for the speakers with this mic and software, but how do I know the...
  16. REW Forum
    Is there a help video or something that can get me started using REW. I have the equipment in the title (well...Im going to be buying the Behringer). I've been searching through the forum, but haven't found anything definitive that shows me how to use it? Any help is appreciated. Thanks in...
  17. REW Forum
    I've been using REW for some time now, and feel like I have a good grasp on things. However, sometimes we often find ourselves moving quickly over some of the basics and then later questioning our techniques. I'm wondering about something like that today. Topic: Calibrating the SPL with a...
  18. REW Forum
    Dear Forum, I am currently seeking to use REW primarily as a recording SPL (for recording aircraft noise, which is by the way preventing me to enjoy an audiophile life anyway). I would like to use the miniDSP USB Measurement microphone UMIK-1 together with the SPL functionality of REW in a...
1-18 of 284 Results
Top