Hello, I would like to split the hdmi output from a bluray player in my home theatre. The issue is I do not want to compromise the audio to the av rcvr. Presently DTS HD Master 7.1 downgrades once I split the signal. Anyone have any experience doing this? Thank you in advance.

I have a pb2000 on the way, can't wait by the way, and now using a polk micro pro 4000 for front sub and micro pro 1000 for rear. Question is, can I use a "y" splitter so I can use the pb2000 and micro pro 4000 for fronts? If so, how would I calibrate them? I'm powering my system with a Yamaha...

Has anyone ever split the signal in their system? I am thinking about splitting the signal from my EQ to the subs and the mains. That way I can Eq both subs and mains from my external Eq. I would probably run the subs full range and use the Eq to adjust them...

I have bought a new Toyota van and opted out of the factory nav system lieu of a better functioning and cheaper after marketsystem. I'd like to run USB ports to all the seats for charging phones and such as well. The head I've got on the way touts a 1 amp output on the usb power wise but is...

OK, I'm open to re-direction if I'm approaching this the wrong way--what I'd like to do is split a digitally supplied sub signal three ways. My current source is an HTPC with an Asus Xonar ST card for sound--I know the I2S signals and I (finally) got a card for converting them to analog...

Hi everyone, I have question in regards to splitting the HDMI signal. Right now I am connecting both my Directv HR24-500 and my Onkyo DV-BD507 video directly to my Sharp LC60LE920UN 60" TV and audio via Toslink to my Marantz SR6004 receiver. I know I am not getting Dolby True HD and DTS-HD...

One of the things I want to do in this new HT room is to use the new HTPC that I just put together to stream movies to both my projector and to the living room. So, right now I have the HTPC hooked up to the living room via a long HDMI Cable and it works perfectly, however now that I will be...

I've got a friend who is suffers from a pretty severe case of arthritis. As a result, he's pretty much bed bound 24/7. Fortunately, in this day and age, he's got satellite (Dish) TV, his computer and the internet to keep himself occupied. But here is the problem, he currently has his main LCD...

Is it possible to split the audio and video signals in HDMI connection? I mean in a passive way, like knowing the HDMI pin-out and building a Y-cable? What sort of AUDIO format would we end up with? SPDIF? AES?

Does anyone have any suggestions for a device that splits out the audio and video from an HDMI feed, perhaps to HD-SDI video and AES audio? I'm going to do an install in a screening room, and I need to split things to a scaler for a Barco projector, and the digital audio input accessory device...

We want to put basic cable in office and to run a splitter off of cable line would be easiest way but of the splitters I tried it must have weakened the modem signal keeping ud from going online. If I have to I can run a seperate line split off another basic feed from junction box but it will...

Dual mono subs => splitting and design questions I'll be making two seperate subs. They will be connected: Receiver (sub out) -> behringer dsp1124 -> stereo PA amp -> subwoofers now is my question, where and how do I split the channel? My thoughts were RCA (receiver) -> 2x XLR (thus using...

Has anyone tried to split the rj45 out from the Microsort MN740 wireless adapter thus feeding both the Xbox and the Xbox 360? I realise it will not do both at once but that is not what I am trying to do. I simply don't want to buy another wireless adapter or have to get behing and switch wires...