Home Theater Forum and Systems banner
sufficient
1-5 of 5 Results
  1. DIY Subwoofers - General Discussion
    Hello. New member, been lurking and learning for quite a while, and I believe that I've finally figured out what I want. My plans are to add a homebuilt sub to the home theater. Was going to go bfm THT, but I simply do not have the home time to accomplish a project like this. My ol' lady...
  2. Home Theater Projectors
    I need help! Please... I have decided to buy a JVCX9/60 but some forum members warned me against its poor light output. So I decided to measure what I have today and ask for advice because, today, I find my setup too dark and I would like to improve it with the X9. If the X9 will leave things...
  3. REW Forum
    I’m new to REW and having difficulty getting sufficient input volume when I get to the “Check Levels” step of the setup process. Here is what I am using: RadioShack analog meter (w/proper calibration file installed in REW) Behringer UCA202 (Behringer drivers installed) 3.5mm to l/r RCA cable...
  4. REW Forum
    Hello, first post here. Still trying to get the right equipment for the REW. I've read about the Soundblaster external card and other mics etc... I do have a digital spl meter but seems to want to give up for some reason. Anyway, I am in the market for a new laptop. Can I have one built with a...
  5. Subwoofer Amps | High Pass Filters
    My question: Is the output level for a subwoofer, on the onkyo txsr605, high enough to push the ep2500 to full capacity? Cause I know the ep2500 has a different input sensitivity. Do I need a cleanbox/eq? Powering a mael-x incase you were wondering. Curious cause onkyo website says 200 mV/470...
1-5 of 5 Results
Top