Home Theater Forum and Systems banner

superchunk

  1. Craft paper on front of superchunk bass traps?

    Home Audio Acoustics
    I was researching superchunk bass traps today and came across this. http://www.facstaff.bucknell.edu/esantane/movies/Acoustic.html I am a little confused. I understand the craft paper is intended to reflect high frequencies. But doesn't it effectively 'close' the front of the trap and...
  2. Did I "deaden" my room too much by adding this superchunk? .mdat inside...

    REW Forum
    I have 10.5 foot ceilings and put a 23" x 23" x 30" superchunk in one corner. While it did wonders for the lows and low mids I fear I may have killed too much of the highs/upper-mids. Out of habit, I bought/used an acoustically transparent fabric, flannel to be exact (it was on sale)! I know...
  3. Superchunk bass traps

    Home Audio Acoustics
    I have a question for you guys. My room is on 11' x 15' x 8'. I only have 3 wall - wall corners that I can do floor to ceiling ssc traps. The front wall I can only manage 17" x 12" x 12" traps in each corner but in the 1 corner in the back I have I can do a 24" x 17" x 17". Would that be ok or...
  4. Superchunk Symmetry

    Home Audio Acoustics
    Due to the asymmetrical layout of my room, the rear superchunks I recently built ended up being different column heights with the left side being roughly a foot shorter than the right side. Based on what I have read on the forum, it sounded like it was important to fill the corners from floor...
  5. Building super-chunk trap, is 703 good enough?

    Home Audio Acoustics
    Hi, I just bought a few bundles of Roxul AFB 2.5 density fiberglass to build a super chunk trap in the 1' x 2' triangles. In order to put a finished, rigid front on it, I plan on putting a sheet on the 2' triangle face. So the ultimate layering would be a 1'x2' triangle, a layer of polybat...
Top