switching

Hi guys, new here and hoping someone can advice me. I have a Pioneer VSX-524 receiver. I had a Samsung JU6600 TV but changed that to a Hisense M7000UWG TV. I will connect and HDMI from the TV HDMI 2 (arc) to the Pioneer HDMI out (arc) and then I enable the cec, power off etc settings on the TV...

We're buying a new house and we get to start from scratch with our finished basement - home theater; here we come! So as per usual I am doing my homework now - we move in a couple of weeks but likely won't get started on the new HT for another couple of months or more, so no better time than now...

Hi Guys- This forum has always been fantastic help for me when I get myself into a situation that the troubleshooting sections of my various manuals do not cover! I'm in one of those situations now: Previous setup: Denon AVR-2313 connected to a Toshiba HD TV via HDMI. TV is monitor 1 coming...

Hi guys I just ordered a LFE kit and second LFE. I want one LFE permanently on and the second to be on at certain times. Could I use something like this to selectively turn each on/off: http://www.amazon.com/gp/aw/d/B0043JBLC0 Further, could I use an AB switch with level controls to adjust the...

Got Marantz AV7005 refurb and hooked up to just a CD player. Sounded good...but then it kept switching to 'standby' for a few seconds, and then back to full power and played music for 20 seconds or so. Sounds like some relay clicking when it goes to standby and back. Any idea? Just get a bum...

So, with all the Christmas decorations in the home and everything having to be moved around and also loosing my mains and dual subs leaving just my center and surrounds, I decided to remove my Elite receiver and install my Yamaha. All I can honestly say is this, there is a huge sound quality...

I just changed from a component video cable based set up to an HDMI set up using my ONKYO TX-SR706 as the HDMI switcher. I have a question regarding how to use the AVR as an HDMI switcher. Right now if I want to switch HDMI inputs, the AVR has to be turned on and I have to manually push buttons...

Source: TWICE

Hi everyone! I am running my Dish DVR through my 809 via HDMI. When I turn the tv on the receiver always selects the TV/CD input instead of the Cable/Sat input so I have to manually switch it to the correct input. Was wondering if you guys could tell me what I have set up wrong. Also when I just...

I've looked everywhere for instructions on how to use the auto switching for 16:9 and 2:35 feature via lens memory. Can someone please post a step by step / menu by menu how to for this? I can't figure it out. Do I put in a 2:35 movie, adjust the screen to get rid of black bars, save, ( but to...

We live in an apartment and the living-room is pretty much an acoustic nightmare in my opinion. I was wondering if there would be a benefit by changing my room around, basically turning the system 180 degrees? I have built some acoustic panels using RHT80, 4 panels that are 2" thick with a 2"...

for some odd reason my reciver is stuck in THX music. i have a Onkyo tx-sr707. i like to watch tv in dolby digital and i can't seem to get my settings back to that. any help would be great. thanks for reading

I want to be able to switch my main stereo speakers between the surround receiver and vac tube stereo amp. Will a 120V/10A 60Hz relay work for audio with high quality? An alternative is a multi-pole ceramic and silver rotary switch.

I can set the tv image to the size I want but when I switch over to my htpc the image size is alot smaller. I would like them to be the same size so they both fit on one screen size. Anybody know how to fix this? projector is an Epson 1080ub

Sports fans were promised high definition versions of Pardon the Interruption and Around the Horn this fall, and it looks like we will get them. Not that we really need to see Jay Marriotti or Dan LeBatard in 720p, but beyond just expanding the Adande Lounge to 16:9, we should see more sports...

I have a set up in my reading room consisting of a Sony 370 BluRay connected to a Sony STR-DN1000 receiver. Even if I am viewing in the direct TV setting , the receiver switches automatically to DVD setting when I put a disk in the player. Two days ago I replaced the Sony DN1000 receiver in the...

My receiver has stopped switching the hdmi sources or upscaling the analog signals. The audio from the hdmi works, also the component input does not work any more either do not know if the two are related. I am sorry I do not have the model # with me will post that later. Thanks David

Hi all, New here and I hope to be an active member. However, my first post is about my new SR707. While watching shows, seems mostly DirecTV content, the unit switches between audio types and the sound drops briefly while doing it. Then about a second later it switches back and continues for...

I'm in the process of planing my HT room, I plan on having a projector and an HDTV(for everyday use). I want to use a HDMI switcher from my blu-ray player to my Pre-amp and also send the second HDMI output to the HDTV. Will the switcher pass the audio signal to the pre-amp and the HDTV. The...

I have been all over the web and cannot seem to find the cause or solution to my problem. I have a TiVo Series 3 HD DVR going to an Onkyo TX-SR607 via HDMI onto a Panasonic P58S1. All of the sudden my audio keeps switching formats when I change channels and pause, FF, and rewind the TiVo. Of...