tc

Hello My other build is on hold for now I am seeing the build cost for cabinet is about 750 SO here is my thought what you build in a sealed enclosure tc sounds 15" or Dayton Audio RSS460HO-4 18" What would you build and which sub? I am willing to use TC sound PRs also if that would help...

I read with great interest this old post: http://www.hometheatershack.com/forums/diy-subwoofers-general-discussion/44315-tc-sounds-epic-8-builds.html I must say that I would like to make it as a subwoofer pc and I also saw these passive 8 of dayton audio...

Hello Just got one of these subs for a bargain, but i can for the life of me find the physical dimensions for the cutout and mounting. Anyone here who has it? Is it the same as the Epic 12?

ED LT1300 12" TC epic First I built a box for the amp. I like trying out different subs so didn't want to build the plate amp into the box. Sealed box 1.75cuft

hi there, got a driver made by a danish compagny called b2 audio, bought it about 3 too 4 years ago. the driver: b2 ac-12 http://b2audio.se/www.b2-audio.com/images/3.jpg http://b2audio.se/subwoofers.html http://b2audio.se/Images/Spec%20sheets/AC%2012%20spec%20sheet.pdf as i am from europe...

I need some help designing an LLT for a TC Sounds Pro 5100. I have tried to model it with Winisd and the graphs look funky, and I know its not right. I'm looking for a tune <=15hz. I am not picky about port shape but, prefer circle. Would like to keep box below 8cf. I would like to not use a...

Howdy fellas. I didn't take any pictures during the build process, mostly because the Tapped Horn design I followed has been well documented here: http://www.diyaudio.com/forums/subwoofers/143714-lab12-tapped-horn.html I substituted the Lab12 driver for the TC Sounds Epic 12, as it has more of...

Seems the maker of some of the very best drivers available has decided to enter the game. Check out this link...

Hello all! I have been planning my first home theater build for a little while now, and I am ready to start building. I am using 2 TC LMS-R 15" drivers with a inuke 6000 to power them. Each driver will be wired at 4 ohms. As for EQ I am using the Velodyne SMS-1. I can not wait to hear them for...

I am looking to build a small sealed sub using a TC Epic 12. I have an EP2500 from a previous build. Will the EP2500 be way too much for the sub using just one channel? I plan to build a second sub in a few more months and would use the second channel on the EP 2500. Thanks in advance for...

This is my first DIY subwoofer, and my next step is to find a amp that will power them. What would be a good amp for these subs. It will be a dual subwoofer system each one in a separate sealed box. The TC site says it can handle 1000 rms watts and the peak is 4000 watts. I have looked at...

Looking for the SDX15 primarily but would consider the TC

Need some suggestions selecting a amp for my subs ... TC Sounds LMS-R 15 & SDX15 in 13 cu ft vented boxes I am looking for the best value power amps to run these drivers ... the subs are located in a riser in the theatre with 12G wiring running to a remote electronics closet under the stairs...

newbie. planning first build exclusively for HT use. low budget and WAF is in play for size as well. planning something on the order of 4-6 ft^3 (and that might be pushing the WAF), ported with an inexpensive sub. Have already ordered a BASH 300 Amp. Top candidates for subs are CSS trio and...

First DIY build: TC Sounds Epic 12/OAudio Bash500 After a long period of reading and analyzing this forum, I decided to do my first DIY subwoofer build. Currently we have an Athena AS-P4000 subwoofer that had a amplifier failure a year ago and we replaced it by and O Audio Bash 500. Since...

Whats and ideal amp for a TC Sounds LMS Ultra 5400 18" DVC Subwoofer

F/S TC SOUNDS 18” ULTRA LMS 5400 & 18” TC SOUNDS VMP PASSIVE Back in march 2008 I bought the ultra lms new. I searched and search for the matching vmp 18” passive. I finally found it in may. In june I bought a amp for my ultimate Home theater system. Well then I lost my job and the toys have...

Some of you may recall over a month ago I was gathering information on building a sub to rival a JL F113, Revel B15 or Velodyne DD series. Below are some pics. Here is the story: I have some experience building basic sub enclosures for cars, but I didn't want another huge project on my plate...

I'm just wondering if anyone was building or planning a build using the PE buyout subs? :scratch:

hi everyone i havent been on the shack in a while. but i have a tc sounds lms 4000 that im gonna use for hometheater. well ive tried using my winsid and its not working right. so can someone help me some up with a box for my room ill get dimension in a lil. but all i have to work with is a...