Home Theater Forum and Systems banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 329 Results
  1. REW Forum
    Finally got REW setup and went through my first test. MDAT file attached here for those who wish to comment! Regards, Dan
  2. Home Theater Projectors
    Hi everyone, I hope its okay to post a review here. If not, please let me know where else can I post? Thanks.
  3. REW Forum
    I am an absolute novice but have enjoyed reading many of the posts on the forums over time. I have recently acquired a BFD (1124) but at this time do not have a mike. Given the number of apps available for the iPhone that measure sound pressure levels can I use these as a starting point to try...
  4. Video Calibration
    https://www.hometheatershack.com/forums/hdtv-video-displays-processors/174760-new-tool-setting-up-4k-uhd-hdr-displays.html#post1610640
  5. REW Forum
    I have a kind of dice living room (5,4m (width) x 5,04m (length) x 3,7m (high) with a lot of hard reflections. And a wife that don’t like to convert it to a studio :) I did some tests with rockwool solids in the corners to create a DIY bass trap with a global absorption. The result however is...
  6. REW Forum
    Is it possible to run the MATT test/analysis via REW? acousticsciences.com/matt
  7. REW Forum
    Hi all. Just discovered REW today and decided it was time to find out what the worst offending issues in my bedroom (home office really) music studio were. Got a Behringer ECM8000 (what did we do in the days before Amazon same-day delivery?? LOL) and was all fired up to get started. I...
  8. Home Theater Receivers | Processors | Amps
    Not surprised...
  9. SPL Meters | Mic's | Calibration | Sound Cards
    Hi, Does someone can help me to understand this? After EQing, to calibrate the SPL of each of my 5.1 channels to 75db and to adjuste relative gain of each channel (+ or - db) into the receiver, I usually playback the test tone of the receiver (see My system). Here the result: FL= 0db FR= 0db...
  10. Home Audio Acoustics
    I heard a while ago about buying insulation and leaving it in the bag to test in out. The cheapest, easy to find rigid fiberglass in my area is Roxul R6 ComfrotBoard IS. I got 5 boxes of the stuff and did some tests. Did this fail as a test or is this stuff too rigid. Boxes have 6 panel at...
  11. REW Forum
    Hello everyone. I finally got REW to work with HDMI using ASIO and Windows 10. The biggest issue for me was assigning the correct output device. Now I'm able to send signals through each individual channel, but I can't choose several channels at once (i.e. Left main + sub). Is there a way...
  12. REW Forum
    Hi, I came across software called "Arta" which tests speaker impedance. I also saw something about this in the REW manual. Can REW test speaker impedance? f so, how does one go about it? Thanks, Ryan
  13. REW Forum
    Hi HTSers, I salvaged some driver from some subwoofer enclosures and would like to test their frequency response. As you can see from the pics, there are no markings such as manufacturer or wattage, etc on the speakers. http://imgur.com/a/Fuuew Now that they are out of the enclosure, how do...
  14. New Member Introductions
    Hi everyone, I'm Dave and I'm here to help find any problems with the forum upgrade and test to make sure everything is working properly! Years ago I had a HT setup and being on this site is making me miss it... lol
1-14 of 329 Results
Top