Home Theater Forum and Systems banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Home Audio Acoustics
    Would there be any issue with using acoustical ceiling tile on walls covered with GOM as opposed to using something like JM Linacoustic as a backer? I see they both have an NRC rating of 0.55. Armstrong has a specific tile for this purpose and is prefinished black.
  2. Home Theater Design and Construction
    Ok my new room is 11' x 22' x 8'. The only problem is I have ceiling tiles for a ceiling in the room. Are there any options besides hanging sheetrock to make this room sound better? I move in in about a month and wanted suggestions. Thanks for your time.
  3. Home Audio Acoustics
    I am treating a small mixing room and need to cover the ceiling to conceal air ducts and plenums primarily for aesthetic reasons, but also to prevent the soft-side ducts from acting like high-Q traps - the 1/4 wave narrow-band suck-outs I measured were exact 4x multiples of the duct diameters of...
  4. Home Theater Design and Construction
    Hey everyone, I would love to hear some input on whether there would be a noticeable difference between putting up USG Cheyenne/Sandrift drop ceiling tiles versus regular old ceiling tiles. If someone has a different ceiling tile to recommend, I'm all hears as well. In the end, my wife wants...
  5. Home Audio Acoustics
    How would the performance of a 24"x48"x4" trap mounted in a suspended ceiling grid, at the corner of the room, compare with a corner mounted trap of the same size mounted just below the ceiling? I have 5/8" sheetrock panels mounted in the grid rather than the usual ceiling tiles (got tired of...
  6. Home Audio Acoustics
    I ran across some USG ceiling tiles in Home Depot that appear to be made of compressed (rigid) fiberglass with a thin perforated white vinyl on one side. Here's a link to what I think they are...
1-6 of 6 Results