Home Theater Forum and Systems banner
titanic
1-20 of 31 Results
  1. DIY Subwoofers - General Discussion
    So, I have a goal of building 2 subwoofers for our family room... I listen to a lot of music, so fidelity is important. We also watch movies, tv, etc... and these will be hooked up to a 7.2 surround system. I was hoping to do one sealed enclosure for the front of the room (don't have a lot of...
  2. DIY Subwoofers - General Discussion
    Could someone help me model the mach 5 uxl 18 in an 8 cf box tuned to 20 hz and the Dayton Titanic mk3 15 in the same box?
  3. DIY Subwoofers - General Discussion
    I spoke to PE, it seems the Ultimax is not a proper replacement for the now discontinued MKIII, I can only guess that a MKIV is in fact planned down the line :yay: MKIV or no MKIV though, I sure am interested in the replacement.
  4. DIY Subwoofers - General Discussion
    Apparently, Parts Express (also dba Dayton Audio) has discontinued the Titanic MKIII subwoofer line. The 12" driver has been out of stock since Christmas and a user who had it on back order has posted that he has received an e-mail saying the subwoofer will no longer be available. If you go on...
  5. Ported Subwoofer Build Projects
    I thought I would update you on this Titanic Mkll 15" build. They are a stereo pair and I am running a DBX crossover set at 50Hz. I have been living with the subs for near two years now and have run them off one SPA-1000 (1.9Ohm load, no problems BTW) and two per cabinet, one per driver (4...
  6. Classifieds - Speakers and Subwoofers
    Hello, I am selling 2 Dayton Titanic 12" 4 ohm subwoofers to pay for the new SI 18's I just bought and will better suit my needs. The Titanics are new, unused and in the original boxes. Both boxes have been opened for inspection but neither woofer has been used. To clarify both are part...
  7. Ported Subwoofer Build Projects
    Hi gang-- Some of you may remember my dual-LLT build from about a year ago (see sig). I'm looking at the new Dayton 18 and getting the itch. Request for opinions. Should I consider swapping one of my 15's for a sonosub Dayton 18? Any potential issues with mixing the other titanic and the 18-HO...
  8. Ported Subwoofer Build Projects
    hello everyone, new to the forum, amazing place. A week ago i had the idea of buying a new subwoofer, and this week i am in to my first build. I did my research first, and will be using a behringer ep 2500 to power my titanic in a 13 ish foot ported enclosure. I perhaps made my enclosure too...
  9. Ported Subwoofer Build Projects
    First, I must thank everyone on the forum for the expansive amount of info. It has been extremely helpful. So I would like to build my first sub. I plan to use the following 1" MDF 32" x 33" x 42" (Front will be 2 sheets thick) Titanic Mk III (seems to be a good fit for the amp, and is...
  10. Ported Subwoofer Build Projects
    Just wanted to start a build thread for the sub I am currently in the middle of building, here are my current working specs: 15" Titanic MKIII Driver 24" Sonotube 450l volume 8.5 inch port, 36 7/8 inches long for a 15hz tune EP4000 amp (using one channel, if all goes well will build another sub...
  11. Ported Subwoofer Build Projects
    First off thanks to all for the help on this. I have a 15" cerwin vega that I am happy with. Has plenty of output but just don't quite go low enough. So I am now ready to build my own. The amp I will be using is the O audio 500. Seemed to be the best deal on a amp I could find, plus has plenty...
  12. DIY Subwoofers - General Discussion
    Hi, I've been a reader for quite a while, just registered on the site as it seems to have the best information available. I have WinISD, and put the paramaters of this driver, a Dayton Titanic 1200, PN 295-400,and I'm coming up with very odd results. When I called PE about the driver, they...
  13. DIY Subwoofers - General Discussion
    Howdy all, Longtime lurker have a few quick questions for members. I have a Denon 7x115 receiver going to Klipsch RB81(II I think) mains on Dayton stands, RC 62 Center, and RS52 surrounds. I currently have a Dayton Titanic 15 Kit as main sub. The dustcap came lose and I received a new one...
  14. DIY Subwoofers - General Discussion
    I finally figured out some of the logistics of moving around in this forum, and winisd, and so here is my modeled build of a Dayton Titanic 15". The room is 20x20, and this sub will compliment my existing pair of sealed Peerless 10" subs. I want to achieve as low a tuning as possible, because...
  15. Sealed Subwoofer Build Projects
    I had planned on building 2 cubes containing 15" Titanic MKIII's, but after completing one I am OK for now & will add another down the line if and when I feel the need for more. Considering my upgrade path from 10" Canton sub to 12" TSC sub, this 15 with Behringer EP2500 is a significant step up...
  16. Classifieds - Speakers and Subwoofers
    SOLD SOLD SOLD Dayton 15"/950W Titanic Mk III Subwoofer Kit (Assembled) SOLD SOLD SOLD http://www.parts-express.com/pe/showdetl.cfm?Partnumber=300-764 - In perfect condition - ~5 years old - In Austin, TX - $375+shipping (not sure how much to ship, but it weighs 99lbs) - Enough bass to get...
  17. Ported Subwoofer Build Projects
    Hi Everybody!! First post. I've been a'lurkin for about a month now soaking it all up like-a-sponge. I built sub boxes for cheapo (Pyramid anybody??) nasty thumping cars back in high school, but I was clueless. This will be my first attempt at a real DIY HT sub build. My woodworking skills /...
  18. DIY Subwoofers - General Discussion
    I have a pair of 15" Dayton Titanic Mk3 subs in 3.5 cuft sealed enclosures. They are driven by a pair of Dayton 1000w amps. I have run into over excursion problems when driven very loud at all. Subsonic filter helps a little. These will be paired with a Maelstrom 18" ported tuned to 15hz...
  19. Subwoofer Amps | High Pass Filters
    Not sure what forum this belongs in. If the moderator feels it belongs elsewhere please move it and let me know where it went. A few years ago I built a sub system using a pair of Titanic 10" subs and a Rythmik Audio DS15. You can see the end result here...
  20. DIY Subwoofers - General Discussion
    Hello, I'm looking at building 2 sealed enclosures for 2 12" Titanic MK III's. 50% music, 50% HT use. I believe 2 - 2.5 CuFt per cab is good yes? I see that is listed as a kit from PE, but want to know if any users here suggest different size based on modeling or experience. My WinISD is...
1-20 of 31 Results
Top