Home Theater Forum and Systems banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-16 of 17 Results
  1. REW Forum
    Hi friends, :huh: =( Really desperate and need some help for this. I've been trying to fix this for past 3 weeks but no avail. I'm on a 5.2 HT setup with the Denon 4520 AVR. All 5 speaker channels are powered by an external Rotel power amp through the pre-outs. I've been using REW and...
  2. REW Forum
    I have a CSL EMM-6 (w/ sensitivity) and a Scarlett 2i2. I used this basic method to calibrate the SPL of REW. I have the mic calibration file loaded in REW as well as one for the audio interface. I take a sweep at a given level using HDMI (ASIO4ALL) from the PC to receiver, say -30dB in REW...
  3. System Setup and Connection
    Hi All, I am planning on doing my own install of speakers in a prewired 5.1 setup. Is there a cheap tone generator that isn't too complicate that folks would recommend? Thanks in advance, David
  4. REW Forum
    Using REW beta 17, the UMM-6 USB mic, ASIO4ALL ver 2.11 beta 1, and an HDMI connection, I occasionally will get a distorted measurement sweep tone. A recording of such a tone is attached. The distorted tone happens randomly, and can occur several times during a typical REW measurement...
  5. Audio Processing
    I have an Onkyo 885(b) processor purchased used in November of last year. It functioned great for about nine months, then some video problems manifested. I thought my seven year old might have inadvertently tinkered with the settings, though I could not see which ones, if any. So, I pushed the...
  6. SPL Meters | Mic's | Calibration | Sound Cards
    Call anyone tell me why there is no sound coming from my rear speakers when using the 7.1 AIX test disc. The tone that should be going to the rears are going to the sides. The tones are correct coming from the AVR test tones but not the HD AIX disc. I have a 7.1 setup, with a Yamaha AVR.
  7. Electronic Processing/Equalization Devices
    Hi, I bought the fbq2496 yesterday. now, what i recogniced is that : (hard to explain, stay with me (; ) if i play a song where a constant 25 Hz tone is played in the background with NO EQUALIZION APPLIED (or bypas mode) the tone/excursion of the membrane/signal light on the ep2500 is like...
  8. REW Forum
    Hello HTS, I am interested in measuring my room as this is my home studio. I have a Presonus studio live 24 and a MT 8000 MES Mic from Behringer. the problem is that although i have downloaded the necessary files like M3D mixer etc, it seem that even now I am not able to chose my in and out...
  9. System Setup and Connection
    I have done everything I can do to get the center speaker to be more treble and less bass. I have gone to tone and treble up to +6 but the sound is still basser than the speaker on the TV. Any suggestions?
  10. REW Forum
    Sorry for all the questions.... A quick one now about calibrating REW's internal SPL meter. Here's what I did: I placed my measuring mic (Rode NT2000) in the listening position. My EMU patchmix was set up like this so the send in the mic channel is sending the signal to REW. I then ran...
  11. REW Forum
    I'm using REW and a BFD DSP1124P for the first time. When I set the levels to do the measurements, I have to put my PB13-U gain down to 7 o'clock and the sweep level down to -17 to acheive 75db on my RS SPL meter. The meter is set to C weighting and slow response. My laptop has input and...
  12. SPL Meters | Mic's | Calibration | Sound Cards
    Does anyone know of a test tone CD I can download as an ISO file? Thanks, Jack
  13. Electronic Processing/Equalization Devices
    Does anyone know why my BFD emits a high pitch tone when I startup my amp? It only does it on group 5 filters. (I have both 4 and 5s programed with filters) Group 4 doesnt do it. I am sure it is a simple reason...just learning the basics here thanks Matt
  14. REW Forum
    Happy Holidays! So I've been using with success REQ and had a need/desire to use the tone generator. I can select the tone/sweep and click play and I get nothing. Everything else is/has worked in this program. No issues hearing/recording sweeps etc. Any ideas?
  15. DIY Speakers
    So i got a free pair of the White van speakers made by "theater research". I am planning on using them for rear surrounds. They sound ok for free... but i am trying to make them better. I unhooked the "sub" and that seems to have helped a bit. However the main problem with them is that the...
  16. AV Home Theater
    Hey Everyone I'll put up some links to some tone-gens available on the net. Good to use when testing your setups/fiddling with your equipment settings. http://www.tucows.com/preview/341419 http://www.tucows.com/preview/240287 http://www.nch.com.au/software/index.html - Other OS versions as...
1-16 of 17 Results