Search Results for ‘tones’

Hi, Does someone can help me to understand this? After EQing, to calibrate the SPL of each of my 5.1 channels to 75db and to adjuste relative gain of each channel (+ or - db) into the receiver, I usually playback the test tone of the receiver (see My system). Here the result: FL= 0db FR= 0db...

Hi everyone, I'm currently working on a track for a Pop-Punk band. I'm trying to get my drum tones sorted before anything else. What I'm already doing is parallel compression for all the elements in the kit and a drum room reverb on all the elements with a low cut till 70 Hz so that the lows...

I am using Tascam US-144 MKII. I have successfully calibrated the sound card with the loopback connection. I have the following questions: 1) At REW's Sound Card Calibration page, I tired to lower the level with the "Control output mixer/volume box" in REW, but it is grey out! How can I turn...

SINEWAVES IN MP3 FORMAT Use CDEX to convert to wave files.

Hello, Can someone here give me the link here at the Shack to download test tones or frequency sweeps to calibrate subwoofer for best locations, thanks a lot...

When I run an REW sweep and then run test tones the db levels don't match up. Here is my latest REW sweep: If I now play a 10hz test tone I get 78.4db SPL instead of 89db or about 11db down from the sweep. But if I play a 20hz tone I get 81.3db only 5db down from the sweep. At 40hz I get...

Anyone know where I can find discrete .1 LFE test tones from about 10-15Hz up to about 100-120Hz? I prefer 1 Hz increments, but 1/6 octave would do. Thanks!

How on earth people get them to sound good, I'll never know. To my ears, they sound horrible. O_O. Amplitube 3 is just as bad to me as 2 was. Sheesh. GTR3 didn't please my ears either. So, what's the secret? :p I'm just a sucker for a hot amp head and actual cab I think.

All the tones that REW generates are extremely choppy. I recently installed REW on a homemade pc running windows vista 64 bit. I have ran this program on mac before and that's how i know that the tones don't sound anywhere near like they should and is messing up the calibration process. My...

All the tones that REW generates are extremely choppy. I recently installed REW on a homemade pc running windows vista 64 bit. I have ran this program on mac before and that's how i know that the tones don't sound anywhere near like they should and is messing up the calibration process. My...

Hello: Are there any circumstances where the use of a signal generator would be preferable to a test CD? Best Regards Eric G.