Home Theater Forum and Systems banner

transducers

  1. Adding transducers who's done it?

    System Setup and Connection
    If you have almost the perfect Home Theater and want to Amaze people and do something just to upgrade your home theater then listen to me and by transduces from earthquake and a separate amplifier and wire up your chair or couch or even a small platform
  2. Who has used Low frequency Transducers?

    Home Audio Subwoofers
    HI I'm wondering who out there has used low frequency transducers (Bass shakers) in their home theatre? Although my sub seems to do the trick in my room. I picked up some transducers on sale ($20 bucks each new & working ) but I don't know if the effort = the gains/sensations? Cheers :D
  3. 3x Buttkicker Advance transducers

    Classifieds - Speakers and Subwoofers
    Looking to save a little money over buying new, need 3 Buttkicker Advance transducers. Let me know what you think is a fair price.
  4. Audyssey and Tactile Transducers

    Audio Processing
    I just had a thought while I was reading through some of the processing threads. What's the appropriate way to set up transducers (Buttkickers, Aura Bass Shakers, etc.) in a setup that is EQ'ed by Audyssey? There seem to be lots of different situations... single sub, dual sub with single...
  5. .1 and tactile transducers

    System Setup and Connection
    Im helping a friend of mine with his HT. He was asking me what to do about getting more low frequency information without adding more subs. My suggestion was to consider the Aura Bassshaker. He has authentic theater seats (similar to my own) and would mount one to each seat. The receiver is a...
  6. Fs Thiele Small parameter, playing transducers below it

    DIY Subwoofers - General Discussion
    Small signal parameters These values can be determined by measuring the input impedance of the driver, near the resonance frequency, at small input levels for which the mechanical behavior of the driver is effectively linear (ie, proportional to its input). These values are more easily measured...
  7. 3 Aura Transducers Connection

    System Setup and Connection
    Hi, I recently connected 3 auras, wired in series to the left channel of a secondary yamaha receiver that is connected to the HT Yamaha Receiver via a RCA Y Sub cable (i.e one feed to the sub, one to the second receiver for the Auras. Impedance on the secondary receiver/amp is 6 ohms. I...
  8. FS: Aura Tactile Transducers "Pro Bass Shakers"

    Classifieds - Speakers and Subwoofers
    For sale are (3) Aura "Pro Bass Shakers", (Tactile transducers). > HERE < is the webpage from PartsExpress where I bought them about three years ago. They've not been used in over a year, they've stayed mounted under my home theater seating chairs. I still have the original boxes. The current...
  9. Amp recommendation for aura transducers (bass shakers)

    Home Theater System Recommendations
    I will be using 4 -8 aura transducers (50 watts rating each) in my sectional couch. I think I will start out with 4 though because from what people's reviews say, 4 should be good for my sectional. My sectional is like this. One about 7ft 3 cushion couch, one about 5ft 2 cushion couch, and one...
  10. BFD and Tactile Transducers?

    Electronic Processing/Equalization Devices
    Hi All, I picked up a DSP1124P yesterday in the hopes of getting my feet wet with REW for measurements and corrections for my sub. As I understand from all of the reading so far, the BFD has two channels (12 filters for each, or 24 for one..). Would it be feasible to have one channel used for...
Top