Search Results for ‘uca202’

HI, I'm trying to digitize some vinyl using a Behringer UCA202. I see the signal in Sound Settings and I can plug headphones into the Behringer and hear the music. I am not hearing anything through my computer speakers. I'm not sure where to look on my computer for the signal. I have Audacity...

After hearing about room calibration, I decided to give it a shot, but it seems I'm stuck on the sound card calibration part. For reference, I have a UCA202 DAC/ADC as well as a Motherboard Line-in port. The UCA202 mic input has a noise floor of -60dBFS, while the Mobo is lower, at -85dBFS...

Dear Sirs, You are my last resort to solve it... I bought last week UCA202 soundcard and Radio Shack meter. System: Win 7 32bit Pc: Dell notebook Soundcard calibrated succesfully Radio shack calibration file loaded Radio shack measurement indicated proper signal from my speaker = 75dB I...

Hi All, I just received my ECM8000 and tried to use it with a Hosa XLR female to RCA adapter to connect to the UCA 202 but it does not seem to work. One of the pins in the Hosa adapter seems to be loose so that could be the reason. I am planning to pickup a new RCA female to XLR cable next...

There's an excellent thread that helped me get started calibrating this sound card, but I still have some questions. REW 5.0 differs somewhat from the information posted there. That thread shows level checking channels as "OUTPUT - LEFT INPUT - RIGHT INPUT", whereas the newer REW version is...

Hi Everyone. First time user and I am having some issues. Might be my set up, not sure. I am just playing around right now and am trying to first get a calibration for my Radio Shack SPL meter. I also have a UCA202 sound card and am using a mac book running 10.6.8 I have downloaded the beta...

I saw these two on Amazon. Having a problem with static with my X-Fi today and want to eliminate it. Here are the links.. http://www.amazon.com/Behringer-UCA202-Audio-Interface/dp/B000KW2YEI/ref=sr_1_cc_2?s=aps&ie=UTF8&qid=1330633571&sr=1-2-catcorr And...

Hi all. what a fantastic resource this forum is with great expertise and loads of hitech info. As a raw newbie I would like some help. I have searched at length but am still not sure as to whether the gear I have will work with REW. I have a calibrated Dayton EMM-6 mic, MXL MicMate Pro USB...

I'm using the ubiquitous Behringer UCA-202 as the pre-in & pre-out for my REW set-up (a RS digital meter [new version] is my mic, although I may get the Dayton mic at some point). My problem I have is that the UCA-202 is reporting high SPLs at bass frequencies, rolling off slowly from 80 dB...

I am currently using the left channel for REW measurement because I cant get the right channel to calibrate. When I click on the start button , there does not seem to be any input signals. I double checked that all the settings are the same as when I used the left channel except I select right...

I just purchased the Behringer UCA 202 and im having trouble installing it to my mac. This was the last piece of the puzzle for me to be able to use REW for my woofer. And im unsure what im doing wrong. It says on the box "Mac Compatible" Yet no green light! And help is much appreciated! This...

Trying to calibrate a Vista Dell Laptop. Cannot find any audio mixer controls. I get this graph and lots of errors. The RS meter is not connected at all. Is that correct? Frustrated I cannot figure this out after reading the UCA thread.

Hello, I am a new man and studied REW for just a month. Now I bought a SPL METER 33-2055 and UCA2022. I noticed that the spl has a RCA output but UCA2022 has two input. So I plan to connect the SPL and UCA2022 with a RCA cable (male to male).Does it work? Thanks.

Hi! I recently bough uca202 and am having problems with it. After quite a bit effort I managed to get sound out of them but but! Every time I want to manually open new file with audio that device goes blinking and from speakers I get noise with every blink. It wouldnt be big issue but my...

The UCA202 seems to be popular with REW (and is listed with hardware suggestions), but how? A condenser mic requires phantom power ? Maybe these people are referring to bass measurements only, in which case they are plugging a SPL meter into the UCA202? ( SPL meter is said to be good enough for...

I think my UCA202 is bad. I am trying to calibrate it with the loopback hooked up. I get an output signal but no input signal. I have tried both channels and have searched this forum for a solution but haven't found a thread that describes my situation. I'm pretty sure I have it hooked up...

I had been previously using a Behringer UCA202 soundcard & Radio Shack SPL meter to make measurements with REW on a Windows laptop. Recently I purchased a MacBook Pro (OS 10.6.4) and with the same soundcard I can no longer control the input volume either through the MIDI or with REW. Without...

hi guys, Just tried doin some room measurements for the first time. Does this graph look correct in the first place? lol The red one is before antimode and the blue is after.Looks like antimode has done quite a good job here but can someone comment on the steep drop from 51.5Hz to 65Hz pls ...

I have one brand new in the box......$25 shipped to lower 48. Paypal only please.

Hi. This is my 1st post.. thanks for all the information provided in this forum so far. It is very helpful I got my UCA202, RS SPL meter, and also REW, and here is my connection: SPL Meter -- (RCA cable) -- UCA202 Input L. UCA202 Output L + Output R -- 2x RCA cable -- Receiver Stereo L and R...