I purchased a UCA222 and was running REW using my RadioShack Digital SPL Meter and inputted the data into my Emotica UMC-200, but the sound is very muddy. I suppose this makes sense since it only good up to 3Khz. So I decided to purchase the Behringer ECM8000, but now it appears that I need to...
I have calibrated this MacBook before using Soundflower without the USB interface and also with the Behringer interface. I sat down last night to redo the calibration and found I was getting odd results. REW flags the results as having a more than 170 db disparity over the frequency range. No...
I now have a UCA222 external sound card and the digital Radio Shack SPL. I'm trying to determine best placement for my Sub as the response right now is terrible and it may need better placement, EQ, both or renewal.
I have the active sub (REL Q100E) connected to the output of the...
hi all I want to measure my home theater room and my diy speaker. so its shopping time but i want to make sure they will all work with my windows 7 pc before order them.
uca 222 (i already have), ps400 and emm6
will this work for REW.
thank you in advance
I now have my behringer UCA222 which was delivered today. I have plugged it into the USB port and opened up REW vers 5 for the MAC.
I have used a single lead to act as a loop for the input/output so I can do the sound card calibration.
First stumbling block is that it works fine when...
I just received and installed my UCA222 and ran some calibration checks.
Response seems to be fine but when the loopback cable is connected from line input to line output, I need to set the OS volume control to max in order to get the input and output levels the same in REW.
Is that what one...
I try to use a behringer UCA222 with a ECM8000 and a yamaha mic amp but my curves are really strange. I made the same curves with my PCI sound card soundblaster, the results are fine. I tried another mic with another mic amp, the results are absolutely the same.
I join the curves, it's...
I tried a soundblaster live on WIN 7 without success and bought a Behringer UCA222 as my frustrations were starting to affect my relationship with my dog!
I can get it plugged in and WIN drivers automatically installed. However I cannot get it to calibrate.
I have read the issues about USB...