Home Theater Forum and Systems banner
updating
1-8 of 12 Results
  1. Home Theater Receivers | Processors | Amps
    I was having trouble updating this onkyo I tried a USB so far no luck. Any help??
  2. System Setup and Connection
    Have worked with a local installer to update a theater of a house I recently moved into. It's set up for a ceiling mounted projector (Epson 6020). There's an existing Cat5 cable and component cables running from the projector to the component rack. The Installer utilized the Cat5 cable through...
  3. New Member Introductions
    Hi All, Good to have a site like this was wondering if there was a part of this site that was just about people that have updated from something to something else Like from Crown to Behringer amps or one processor to another and how satisfied they were. Not anything too detailed but more of a...
  4. Home Theater Receivers | Processors | Amps
    My 20 yr old sherwood rv1340r died a couple of days ago(turned off & did not turn on again). As you can tell, i dont update regularly, only on an as needed basis. This was actually a home sound system that gave me some basic home theatre functions. I have alot of legacy equipment, nothing HDMI...
  5. Home Theater Systems | Equipment
    When you get new equipment, it is not necessary to edit your original thread, replacing your old equipment with your new equipment... simply add a new post to your thread with your new equipment. This serves several purposes... 1. It gives you an easy referral to the history of equipment...
  6. Home Theater Receivers | Processors | Amps
    I know it is possible to update the firmware, but I have no idea how to do it or where to find it. I have heard rumor of an update, but am unable to find anything on Pioneer's website. I am really hoping they can add the new THX Loudness Plus technology... but i doubt it.
  7. Blu-ray | DVD | Disc Media Players
    See: http://209.167.114.38/support/ceg/downloads/ to get current firmware ISO's for Toshiba HD DVD players. Both version 1.5 firmware for gen 2 and also version 2.2 firmware for gen 1 are here. This is from a Toshiba Canada site. ISO's are intended to be burnt as a binary image to a CD for...
  8. Electronic Processing/Equalization Devices
    Finally finished the job. Tricky, but it can be done. First picture shows the six screws that need to be removed to get to the guts. You will need a #1 and #0 Phillips screwdriver.
1-8 of 12 Results
Top