uxl18

I've been really looking forward to the subwoofer part of our eventual basement build, and I finally have made progress on that front. I knew for a long time that I wanted to try a sealed approach this time, having had 2 different ported subs before (and currently). I thought I'd go for a pair...

I was recently able to just squeak in to a group buy for a pair of Mach 5 UXL 18s, and I jumped on it before I had a chance to do much research or planning. I took enough time to assure myself that the price was right, and that they were still solid performers, and the local Canadian source (no...

Hey Guys I Brought a Dayton sa1000 rack amp and was wondering what would be the best driver to pair it with for HT? Im in Australia so the choices are limited. I was looking at the Dayton um-18-22 18" ultimax to match the amp or am I better to try and find a mach 5 uxl-18 or is there a better...

Thinking about doing a 4 cu. ft UXL18 sealed build with an Inuke 3000dsp amp. Would 3/4" mdf be adequate, or is 1" required for this driver/amp/enclosure?

First off, a huge thanks to Steve and Mike for helping me zero in on my objectives for a first (and hopefully last, for this part of the house) subwoofer build. (Rambling pages of indecisiveness on driver and design can be viewed here.) I have many hobbies and interests in life, and am well...

Hey guys, Right now I have 4 UXL-18 subwoofers going to 2 EP4000's, one on each channel for 4ohms (they are 4ohm SVC woofers) wired in stereo. I would like to wire them up so I can get 2ohms per speaker in stereo mode but am severely confused on how to do this with the Behringer. Would the...

This feel that I have read the very thread I am starting a countless number of times; my problem is that I have been planning an LLT for a few years now and during that time have selected several favorite drivers--only to see the manufacturer go out of business time after time! Avalanche, Sound...

My WinISD program has gone haywire. I'm unable to model anything. It keeps stating access violation. I unistalled and reinstalled=nothing. Anyways I have 2 ready made empty enclosures. One is 3.8ft3 & the other is 5.5ft3. Both are before drivers, bracing and ports. Will the UXL work best in...