Home Theater Forum and Systems banner
watts
1-19 of 19 Results
  1. Movies | TV Shows | Hollywood
    “Genuinely hilarious” - The Playlist Ben Stiller, Naomi Watts, Amanda Seyfried And Adam Driver Star In The Coming-Of-Middle-Age Comedy WHILE WE'RE YOUNG From Oscar®-Nominated Filmmaker Noah Baumbach, Uproariously Observant Film Arrives On Blu-Ray™ And DVD June 30th SANTA...
  2. Home Theater Receivers | Processors | Amps
    I have a couple of thoughts/ questions floating around in the ole brain housing! If a receiver has 135w/ 2 channel and it says it has dynamic power of 150w, is this what is meant by reserve or head room? If so this does not seem like a lot. I know that I am probably never using much more than...
  3. Subwoofer Amps | High Pass Filters
    I am back :) I have been using a crown xls2000 amplifier to power my Jl audio 12w7 subwoofer in a 566 liter box . I have been using one channel of the amplifier to run the subwoofer at roughly 850 watts . The subwoofer is rated at 3 ohms and the amplifier is rated at 2 ohms 1050 watts , 4...
  4. Home Theater System Recommendations
    So I have had my current setup for a very long time. It has done well for me, but I have the itch to upgrade. I would like to upgrade to some floorstanding speakers to get a little more sound. I mostly use my surround sound system for movies and video games not much music. My dilemma... My...
  5. Home Theater System Recommendations
    I am currently looking for a sound system to install in a room that is about 20x12. 20 feet in length, 12 feet width. The one thing I am in love with, is bass... I want this system to be able to be hooked up to a laptop, so auxiliary compatible. It needs to be extremely bassy, but obviously...
  6. Home Theater Receivers | Processors | Amps
    Is the Watts super important in a Receiver? I read someone say it isn't as important in speakers and it was a marketing thing. What about receivers? If it does what is a good "amount" of watts? Thanks.
  7. Ported Subwoofer Build Projects
    I've been out of the DIY theater world for awhile and thought I'd build a new sub with an Adire Audio Shiva I had lying around. I was looking to spend approximately zero dollars on this as I used stuff I had lying around, so here's how it turned out in comparison to the Dayton DLS-10 I was...
  8. Creative Sound Solutions
    I built a sub a few years ago with an SDX15 with 2 passive raditor and a 250w Dayton sub amp. The sub was a little big so I cut it down. The internal volume subtracting the bracing and amp is about 6 cubic ft with one passive radiator. The bass really didn't change much after I cut it down...
  9. Subwoofer Amps | High Pass Filters
    Hi everybody noob question, but when modeling in fx winisd, should you input the amps rms watts or peak (I'm thinking in regards to avoiding exceeding x-mas of the driver?
  10. Home Theater Receivers | Processors | Amps
    Can i connect 90 watt per channel Amplifier Pioneer VSX-1021 to 130 watts Davis Acoustics Speakers? will a clipping occur as I am connecting an underpowered amplifier to those 130W speakers? The Amplifier Specs are as follows: ›› 120W x 7 (1 kHz, THD 0.05% @ 8 ohms) ›› 90W x 7 (20 Hz – 20 kHz...
  11. Great Deals and Specials
    Only $209.99 40% OFF | MSRP: $349.99 1742 Available | 8 Sold as of 12/16/11 3:10pm CST Free Shipping
  12. Ported Subwoofer Build Projects
    Thought I would share a sub build I have planned and will start sometime in the not to distant future. Most of the info is as per title. This will be around a 100 litre cab as per the recipients requirements, ported and tuned to 18hz using a 500 watt plate amp. Currently the owner is looking at...
  13. Home Theater Receivers | Processors | Amps
    Hi, Is there going to be any notable difference in sound quality if you put more or less wattage into the center channel than you put into the mains?
  14. Classifieds - Speakers and Subwoofers
    Just put this on ebay, the Hsu STF2, unit is in excellent condition. This is one of the very best subs in its price class, and if you don't believe me just ask the guys in the subwoofer forum. This is not a sloppy sounding, boomy, muddy cheap sub. Even though it's inexpensive, it has tighter...
  15. DIY Subwoofers - General Discussion
    I have 2 JBL JT5-12 subwoofers ( http://manuals.harman.com/JBL/CAR/Boxes%20and%20Parameters/GT512Tech_050108.pdf ), that I wanted to make into a music subwoofer, both driver's in 1 box. I modelled the driver in Win isd but I must be doing something wrong?. I wanted to drive the sub's with a...
  16. Home Theater Design and Construction
    I am not sure if I am looking for the right thing or not. I want to power 5 x 18watt 12 volt DC lamps (90 watts total) via a 120 volt to 12 volt adapter. What amp size adapter do I need? I purchased these Malibu Brightscapes Landscape Lighting Deck Lights for my step lights on the riser...
  17. DIY Subwoofers - General Discussion
    I just scored a Peavey CS400X which is stable into 4 ohms bridged at 600 watts (according to the manual). I'm interested in building a 15" sealed sub. I'm going sealed because of box size, and build simplicity vs. ported. I know I could build a very efficient, powerful ported design with 600...
  18. Home Audio Speakers
    I was just wondering if anyone has tried bi-amping a speaker using different watts? Since everything under 80hz LFE goes to my PC13-U, would it be noticeable if I used 400w for the Mids/Tweets and only 140w for the woofer (Axiom m80)?
1-19 of 19 Results
Top