Search Results for ‘working’

Anyone in the know about home cinema systems? do the modern amps have fuses protecting each channel? long story short - i bought a second hand LG HB405 to replace my temperamental LG BH7430p unit on the understanding the only issue is laser needing replacement but got it all wired up to...

I have been using REW for some time now but since the recent Windows creators update I cannot get it to see the microphone input. It sees the sound card and it is the same settings as previously but nothing comes through! The sound card still works with other software ok. I bought a separate USB...

I have a powered sub, Polk PSW10 connected to my Onkyo Sr-535 with a standard subwoofer cable, not a y-sub cable. I was told to turn the Low Pass all the way to 150 to essentially create an LFE. I then placed my Sub into Auto On. On my receiver, after doing the auto calibration, the...

Hello, I am new to REW and the forum. I installed V.5.17 B11 and was setting it up using my MacBook air speakers and my Berhinger ECM8000 connected to my IrigPro interface. The timing reference sound is heard when I run the measurement. When I connect to HDMI, the timing reference is not...

Mitsubishi DLP WD-65732. I dropped satellite a couple of years ago and have been using antenna input. The TV has 2 coax inputs. Both stopped working. I can switch back/forth between inputs from the menu, then do a channel search, wait for it to complete, but it doesn't find any. The other...

OK, I use the REW every few weeks and last time I used it about 2 weeks ago my mic and SPL sound pressure meter worked just fine. But now I can't get it to work. I use a UMIK-1 mic and it shows in preferences that is what I picked. I even tried to use the internal computer mic and it still won't...

Ok, so I have had a Pioneer Plasma Model PDP-42A3HD for a bit and the TV itself it works great and looks amazing. My problem is the remote sensor on the TV does not seem to work. The reason I say remote sensor is when I hold up the remote to a camera, you can see the IR blinking purple, so I...

Is anyone else experience this issue? When I'm running sweeps, all of my measurements are defaulting to 1/48 smoothing even though I have no smoothing selected in the analysis preferences. What's strange is, I ran sweeps a few weeks ago and it didn't do this so I don't know if there's something...

Hi, I noticed that ever since I updated to OSX 10.11.4 I could no longer get a measurement to generate. When I try to run a sweep I cannot get REW to generate a measurement. It just shows a -180db line. RTA doesn't work either. I use to be able to make measurements prior to 10.11.4. I tried...

Hi Everyone, My Akai amp is only playing sound in one channel switched the speaker around still same thing, I checked the fuses and one has blown out. Can anyone help me identifying the fault? Shall I jut replace the fuse and try it back? The components look fine by eye. I am not an expert but...

Hello for some unknown reason my Home Cinema system stopped working suddenly, until today it was working for more than a year w/o any problem. Here it is: PC nvidia card ->(7m HDMI)-> AVR Pioneer VSX 924 -> Panasonic plasma/Benq w1070 projector(10m HDMI) Today i get no picture from PC on the...

I have a new Yamaha BD-S677 bluray player. While it sounds great, I can't seem to get my new Droid Turbo Android phone to connect to it's Miracast. I push the Miracast button on the remote and have 60sec to go into settings > display > cast screen on my Android phone. I only get a notice 'no...

Hi, I've been using Rew for a couple of years, so I do know the basics. I have an old laptop running XP that I use to take room and frequency measurements. I've never been able to make it take an impedance measurement though, so I've always used my desktop for this. I use a homemade jig and it's...

Hello everybody there, :-) I am working on my Open Source - Open Hardware project from few weeks. It's a kind of controler, based on a Raspberry Pi 2 and few libraries files that I have writed in C language. I plan to embed it into my 19" x 1U rack (prototype) Valves Guitar Preamplifier to...

hey guys i just got my umik-1 mic and i dont have a clue as to what im doing. how do i get the sound to come out of each speaker? right now i can only get L/R.

Hello everyone, I'm hoping I can get some help here. My home theater system has worked just fine for the last 4 years. I have a Pyle Pro PT260A audio receiver hooked up to a DVD player, a CD player, and some speakers. Just yesterday we sat down to watch a movie and no sound would come out. We...

Hi everyone, We have a Samsung HT-H5500W Blu-Ray home theater system. We have only had it for about 6 months. Suddenly, the subwoofer seems to have quit working. We have checked all of the wiring and that is all fine. There are no loose connections or damaged wires. We went into the...

So I had to unplug all of my cables from the back of my samsung home theater HT-F4500 to plug in my RCA cables, however after I plugged them back in the sound just stopped working. I've tried changing the settings on my Samsung smart TV to external speakers and making sure everything was plugged...

Hi everybody - my first post and I am looking for help. I decided to jump into room mesurement with the aim to do room treatment and some signal correction through miniDSP. I downloaded REW on my old laptop to discover that it is not 5.1 or 7.1 capable. OK, I bought an external sound card...