Home Theater Forum and Systems banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. Mitsubishi
    Hello everyone, I just picked up a ws-55809 for $50 dollars, I read plenty of reviews before I bought the tv and new there was a chance of green screen problems. What I didnt know was regular picture could look great and HD look well....nothing at all, or completely green. Long Story short, I...
  2. Mitsubishi
    I have read several posts that talk about a flashing green light. I don't have any flashing light even after holding menu/reset. The tv went out; however before it went out there was distortion of the picture. Any ideas since there is no light flashing?
  3. Mitsubishi
    Hi all, I have replaced the blinking-light-of doom and the dead convergence chips, plus a few resistors and pico fuses. Now I have an unusual problem. I have three white sockets ("DT" on main PCB; "RA" and "RM" on the signal and power PCBs, respectively). However, I have no free connectors on...
  4. Mitsubishi
    I did the IC fix with help from you guys a while back. Now I have a different problem. When you hit power, green light comes on, set turns right off with a second. Wife was in the room and heard a "pop" and the set powered off. Now the green light of death. No owners manual, any ideas what to...
  5. Mitsubishi
    I have a ws-55809 set that I pickeup up for almost nothing a couiple years ago. All was fine until last week the set does not power on and gives the 2-2 code. I have a very reasonable guy here that will fix the boards but of course till he travels to my home and all I am into $300. This...
  6. Mitsubishi
    The set is about 10 years old. Aproximately a year ago the green crt went out. I put the set in storage. A few days ago I replaced the entire crt array. Once I powered up the picture was out of focus and the flyback transformer was "buzzing or hummimg" abnormally. After shut down there was no...
  7. Mitsubishi
    The mitsubishi ws-55809 can turn on, audio and the menu's work, but none of the video inputs work. I did the code check and it came back as 1-2. There seems to also be a convergence problem? as you can see from the pictures. I read somewhere that if i have a 1-2 error code that it's not...
  8. Mitsubishi
    I have a WS-55809 Mitsubishi which just stopped working. The power light was constantly on, with no response from the TV, not even that relay click that happens when turned on. I unplugged then plugged and nothing, just a green light but no other power, like it was locked up. Since...
  9. Mitsubishi
    Hello - Great site. I think I've seen similar symptoms/resolutions, but wanted to be sure. If anyone has any tips/thoughts, would be appreciated. Basically, turn on set, you get the concaved image and overlapping images. Image seems to click back into place when warmed up, although, lately...
  10. Mitsubishi
    TV worked fine yesterday. No issues prior to today. Picture has always been great. Powered on tonight and got nothing. No sound, no video, no lights. Its as if its dead. Unplugged and reconnected power. Front panel LED turned on solid. No video, no sound. I powered off again using front...
  11. Mitsubishi
    I'm getting this Intermittent hazy appearance that makes the picture look washed out. The colors are still present but it looks really washed out (or appears too bright), and this comes and goes. At times a minor tap on the TV will make this happen or go away. A service guy came out and...
  12. Mitsubishi
    I am having the red convergence and shadows like other have described. I read the convergance thread and this one as well. http://www.hometheatershack.com/forums/mitsubishi/2978-mitsubishi-hd-1080-red-green-shadows.html I got into the set tonight. I went in throught the back. I found the...
  13. Mitsubishi
    Good Afternoon, I have a Mitsubishi 55" wide screen, rear projection TV model # WS-55809 manufactured in October 2001. This morning I turned it on and after about 30 minutes, the TV powered off by itself. I tried to turn it back on, but it would not power on. I unplugged it, left it alone for...
1-13 of 13 Results
Top