Search Results for ‘ws’

tv powers up, steady green light, "power loss please reset clock" appears on screen but is bowed down in center. Error code 12 indicating no error. I can change inputs but no video or audio. tv had convergence repaired by previous owner but don't know how long ago. Was givin this tv 3mos ago...

Right now, my TV is flashing green light after a convergence repair. I have just replaced the DM caps and I still have the same problem. I'm hoping to find some help to keep my Mitsubishi WS-65869 going for another year or more until OLED's mature a bit! The initial problem was that the TV...

Hi, my name is Steven and I stumbled across a thread regarding a Mitsubishi ws 55313 that won't power on. I haven't seen my exact issue, so I'm making a new post. Sorry if I overlooked an existing one with my exact issue. The TV had error code 22, and I have already replaced the convergence ic...

My TV started having issues for about a year where it would suddenly turn off. At the beginning you could simply turn it back on and it'd work for awhile. As time went on it got worse and for a while you could leave it for a couple days and come back and it'd work for hours. But about a month...

My TV started having issues for about a year where it would suddenly turn off. At the beginning you could simply turn it back on and it'd work for awhile. As time went on it got worse and for a while you could leave it for a couple days and come back and it'd work for hours. But about a month...

I get loss of picture, screen goes black , audio still on, same problem across all inputs, like I am losing video signal. found coolant leaking onto multi component processor ic. sometimes tv works fine , sometimes it doesn't , could this ic be going out? I took out the board , cleaned with iso...

Replaced 2 convergence chip and one pico fuse and it blew again the pico fuse tv wont stay on, should we replace resisters or don't know day 4 into athis, also it had a blinking light error code 2-2 so that is why we changed out the convergence and only one pico fuse was blown, now installed...

Hello all couldn't find the answer in a search How I ended up with this TV one of my neighbors got rid of his Mitsubishi WS-55511 TV so I hauled it off for them. It works but the RV doesn't after reading sticky I pulled the convergence board and found 2 blue diodes or fuses bad don't know...

Yesterday morning, my husband turned on the TV (using the Tivo peanut remote), proceeded to pick something from the Tivo queue, then something happened. I heard a muffled thump inside the TV, then the screen/TV shut off completely. We unplugged the TV for several minutes ("did you remember to...

I have been in Computers all my life, just haven't done a lot in TV repair beyond some minor alignments etc. I got the Service manual from one of the links here and have been reading it. Here is the issue. In both standard and HD mode, my picture on the screen is to wide and to tall. I...

I have a Mitsubishi WS55807 that one day simply did not turn on. It smelled like something electrical had burned from the back of the TV. I unplugged the TV for a few minutes and them plugged back in and it turned on with no problems. I tried shutting off and turning on a few more times, and...

I have a Mitsubishi ws65909 that had the green blinking light problem. I removed the DM board and replaced the capacitors. TV worked good for about a year. Then the green blinking light problem came back. I pulled the DM board out again and the caps look good. But, 2 of the caps are loose on the...

I just replaced two convergence IC chips (stk392-570) in my mitsu ws-65809 65 inch, I also replaced 20 and 22 pico fuses (the two fuse's for the IC's), the set was completely dead prior to repair, no error codes and no blinking green light, I replaced the IC chips and the two pico fuses and now...

I just replaced the convergence IC for the second time and the 7 capacitors for the first time on this unit a couple of months ago. About 3 weeks ago (been too busy to post on this), I turned on the TV in the morning and withing about 5 minutes it shut itself off and the power light began...

I have a Mitsubishi WS 55413 and am trying to remove the PCB on the right. I have it all unhooked except for the white wire attached to the flyback transformer. It has a rubber collar around where the wire comes into the Flyback and it doesn't pop off with a firm pull. I don't want to just yank...

I have a Mits WS-55711. I picked it up from a person who lives in an upstairs apt. In the process of sliding it down the carpeted stairs, my partner dropped it the equivilent of 8" (1 stair). I can't be sure if this caused the problem but when I got it home, the left edge of the picture is a...

So here's one for somebody with some tech expertise....Mitsubishi WS 55315 that is several years old, but has really low mileage on it because it is in our basement and the system we use the most is on the main level in our home. It started acting a little flakey several months ago and I've...

I recently resurrected my WS-55511 from the green light of death by replacing the convergence IC and the 7 capacitors. The unit has been working great for about a month but suddenly last night could not get green color in any picture sources. I have a Roku streaming device and both movies we...

Hi, First, thanks for this forum, I've learned a lot already. I just replaced the two convergence chips in my WS55819 after it developed a "3d effect". I had to call in a professional after the problem returned, and he said that I just didn't use enough solder in a couple of spots. After...