Home Theater Forum and Systems banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Mitsubishi
    First a little info about the TV. It looks like it came off showroom floor very clean. I was given this TV but I know it was working fine then one day it just quit. The owner bought a new flat screen and just wanted it out of the house. The TV will power up when plugged in normally (green light...
  2. Mitsubishi
    Hi Leonard, > I had posted on a couple different online forums dealing with the > Mitsubishi green blinking light and you had responded tothose posts. I > wanted to relay to you the status of my situation. I have a Mitsubishi > WS55511 that I purchased in Dec 2002. The blinking light started >...
  3. Mitsubishi
    About three months ago I replaced the convergence chip in my T.V and everything has been working fine, until yesterday when the power went out to my house. I was watching the T.V when the power shut down and then cycled about three times within a couple of minutes. After that all I got was a...
  4. Mitsubishi
    I am in the process of replacing the convergence chip and noticed the chip is only secured to the heatsink by a clamp. Do you think it would be okay to drill two holes and screw the chip to the heatsink? I'm not sure the clamp puts enough pressure on the chip to give good heat transfer. I would...
  5. Mitsubishi
    Good Morning, I was given this Mitsubishi WS 55511 set. It looks like the previous owner changed the IC chip STK393-110 and the 2 fuses. He did a POOR solder job. Lucky that I have a friend who cleaned it up. OK, The set powers up, sound, picture. But I can not adjust the convergence with...
1-5 of 5 Results
Top