Home Theater Forum and Systems banner

xenyx

  1. Eurorack UB802 v XENYX 502/802

    SPL Meters | Mic's | Calibration | Sound Cards
    Hi, First post. Just got REW and trying to get prepared to take some measurements of my audio room to figure out room treatments needed. I've been reaading a lot of the threads but I'm confused at this point. The REW Cabling and Connection Basics Guide says Xenyx 802 then 502 but shows a...
  2. Xenyx 802 mixer issues

    System Setup and Connection
    So today I hooked up four Polk Audio RC85i in-wall speakers to a QCS GX3 amp and a Xenyx 802 mixer. I'm running my dvd audio to the mixer via rca to 1/4 plugs. And the mixer is running 1/4 to rca cable to the amp I think I have everything hooked up correctly, but I can't get any sound from my...
  3. Xenyx 302USB work with REW?

    REW Forum
    Anyone used the xenyx 302USB for REW? Seems like the ticket if it works well. I also would like one less component to have to keep up with......
  4. Behringer xenyx 302USB

    SPL Meters | Mic's | Calibration | Sound Cards
    Nice [can't post links search for it yourself] it's a 1 mic and 1 line mixer with a usb port which supplies power you can play from AND to usb Well it means at least one less cable and no power supply for the mixer necessary, but a little bit scant on information, but here is hoping there is...
  5. EMM-6 + Xenyx 502 setup?

    REW Forum
    I have upgraded my REW from a RS SPL to a EMM-6 microphone with the Xenyx 502 amp. Can someone point me to a link or posting that provides basic instructions for setting up and using the new mic/amp? I have downloaded the EMM-6 calibration file and configured it in the REW preferences. I...
  6. Bad ECM-8000 or Bad Xenyx 802 ?

    REW Forum
    Hello REW-ers, I am using the "standard setup" with ECM8000 mike and Xenyx 802 mixer and DCA202 USB Audio. I hadn't used the equipment in a while and when I tried to use the system this weekend I had a lot of noise making the system useless for measuring. Thru elimimation I am down to the ECM...
  7. Is 12:00 knob pos. correct for Xenyx 502

    REW Forum
    Hello. I've set all my knobs on my 502, except for the Main Mix, to the 12:00 position. Can anyone tell me if that is where they should be set before running the REW program? I am getting some strange graphs when I turn on Audyssey and am not sure where the mixer or how the mixer should be...
  8. Calibrating the xenyx 802 preamp

    SPL Meters | Mic's | Calibration | Sound Cards
    I've read a few conflicting things, some one mentioned not calibrating the preamp, but the majority of the posts I've read said that calibrating the preamp with the sound card is a good idea. This isn't my main question, but I thought I would verify it prior to make sure I've covered my bases...
  9. Xenyx 802 / ECM8000 questions

    REW Forum
    Hi Guys, I tried to do some measurements today but it all went pear-shaped and ended up with me blowing my top... lots of swearing and perhaps some violence against inanimate objects, it was frustrating. I have done plenty of measurements before, and usually I get it all going fine after some...
  10. XENYX 502 vs XENYX 802

    SPL Meters | Mic's | Calibration | Sound Cards
    I was looking at the necessary components to begin measuring my system and saw that the recommended mic preamp is the XENYX 802. I was browsing Behringer's website and came across the XENYX 502 which appears to be able to do the things we need. The price is also $15 less. Is there any reason...
  11. Using Xenyx 1202 with Tascam US-122L

    REW Forum
    Go orderly and calm:D So, I have the Tascam US-122L, the xenyx1202fx (is good anyway?) and this week I will go to buy the ECM8000 (if the Beheringer decide to deliver the goods to the shop where I go:paddle:). I read in "REW Cabling and Connection Basics " topic, that it is should to connect...
  12. Using Xenyx 1202 with Tascam US-122L

    SPL Meters | Mic's | Calibration | Sound Cards
    Go orderly and calm:D So, I have the Tascam US-122L, the xenyx1202fx (is good anyway?) and this week I will go to buy the ECM8000 (if the Beheringer decide to deliver the goods to the shop where I go:paddle:). I read in "REW Cabling and Connection Basics " topic, that it is should to connect...
  13. xenyx 802 and the trim knob.

    Electronic Processing/Equalization Devices
    Perhaps not the right forum, but I had some issues using my ep2500 and my sub as supposedly the line level was not enough from my receiver(-10 dBV instead of +4dbu) so I plugged the sub preout into my 802 and out to the ep2500. There is an input trim knob, however I am not sure where the...
  14. Behringer EURORACK UB802 or XENYX 802?

    SPL Meters | Mic's | Calibration | Sound Cards
    I was on my way out the door to buy a mixer and noticed the thread "REW Cabling and Connection Basics" stated "REW connections using an ECM8000 microphone and XENYX802 preamp (recommended combo)" but the picture shows the Behringer EURORACK UB802. I assume there is a difference or Behringer...
  15. Xenyx 802 vs MIC100

    SPL Meters | Mic's | Calibration | Sound Cards
    Hi Folks, Although the Xenyx 802 is very attractively priced, I can't help but feel that it's a bit excessive just to use as a single channel microphone preamp. The Xenyx 802 is, after all, an eight-channel mixer. However, I see that Behringer produces a single channel vacuum tube preamp - the...
  16. Behringer Xenyx 802

    SPL Meters | Mic's | Calibration | Sound Cards
    Xenyx 802 Testing chain: External loopback (line-out - line-in) Sampling mode: 24-bit, 96 kHz Looped with EMU 0404 USB 1/4 TRS Input - RCA Output Frequency response Noise Level Dynamic range THD + Noise (at -3 dB FS) Intermodulation distortion Stereo crosstalk...
Top