Home Theater Forum and Systems banner
xlr
1-19 of 30 Results
  1. System Setup and Connection
    Hi, I just got a pair of adam audio T5V speakers, I purchased a pair of XLR to 3.5mm Aux cables so that I could connect them to my PC, these are then put into a headphone splitter and plugged into my line-in port on the back of the PC, however when they are connected the sound is severely...
  2. Home Audio Subwoofers
    Folks, Greetings... Its been a while since I posted...and feels good to be back... I'm based in Bangalore, India and have 5 channels of Neumann KH310 (3 way active, with total 290W in each channel) with MOTU Ultralite MK3 as my "Sound Card". Source is a PC playing FLAC files from a hard-drive...
  3. Classifieds - Speakers and Subwoofers
    Flawless condition. Will be $$ to ship, so if interested let's talk to get some quotes. I do have the original box, but I think it'll have to be double boxed. I've had this sub for about 3 years I think. No problems with the amp! The Epik Sentinel measures 14.5" wide x 20" tall x 20" deep and...
  4. Home Theater Receivers | Processors | Amps
    I recently moved to an Outlaw 7500 and AV7702, and XT32 is bottoming out adjustments on the efficient Klipsch speakers. I have been reading a lot on attenuators and wanted to see what you guys thought about these...
  5. Remotes | Cables | Accessories | Tweaks
    I've done some google searching, and found only two available, which do you think is better? Or is there another one I overlooked? I'm considering the ART CleanBoxPro and the Rolls MB15b Promatch. My problem is I want to connect my Mackie HR824mk2 speakers and Mackie HRS120 sub to my Yamaha...
  6. Home Theater Receivers | Processors | Amps
    I am looking to amp my home theater with QSC PA style amps, the issue I am facing is converting the RCA amp pre out on my Marantz 7007 to a signal that is usable for the QSC amps. Looking to convert it to balanced XLR with the cleanest sound possible without any additional distortion. I have...
  7. Home Theater Receivers | Processors | Amps
    Folks, After spending considerable time researching sound-cards with balanced outputs to use on my HTPC - I've now realized it'd be easier to setup and more WAF friendly to get a processor instead. My mains (L/C/R) are Neumann KH310 (Active 3 way, balanced XLR inputs)... not yet decided on the...
  8. Home Theater Receivers | Processors | Amps
    Folks... I'm setting up a 7.2ch home-theater with All active monitors (with built-in amps and only XLR input)... The speakers are Neumann KH310 (3 way tri-amped) for L/C/R and for the surrounds - possibly Genelec 8030 or Neumann KH120 and a couple of DIY dual-opposed 12" subs. I'm looking for...
  9. SPL Meters | Mic's | Calibration | Sound Cards
    Which is the best out of the two, other than USB being convenient? Thanks in advance
  10. System Setup and Connection
    I'm just starting to collect some gear that uses XLR cables. Can my forum members recommend or suggest their preferences for good entry-level XLR cables? Regards, Dan :T
  11. System Setup and Connection
    Not sure if this is the correct section to post this but iv just bought a Crown XTI 4000 to power a couple of stereo subwoofers in my system. I would like to connect the Crown to a Naim NDX as its source. The Naim OUTPUT has only two options 2xRCA or 1 x Din. I am using the RCAs to connect to...
  12. Pro Audio
    I just wound up with a pair of JBL PXR365s and I'd like to connect them to my HTPC. What is the cleanest way to go from a 3.5 headphone jack on the computer to separated left and right stereo XLR to the speakers? Thanks!
  13. SPL Meters | Mic's | Calibration | Sound Cards
    Hello guys I came here to get some suggestions to buy my "measurement set", I was thinking about buying an EMC8000 and an USB to XLR adapter like this one http://cdn.mos.musicradar.com/images/Tutorial%20images/Tech/laptop-audio-interfaces/blue-icicle-660-80.jpg or something similar. That's...
  14. Remotes | Cables | Accessories | Tweaks
    I'm looking to purchase a set of 7 XLR cables to connect my AV7005 and amp combo. This is my first Pre/Pro setup and haven't had much experience with balanced outputs. Does the quality of the cable make a huge difference with sound quality? I'm a Martin Logan guy with 60/40 split with Home...
  15. Remotes | Cables | Accessories | Tweaks
    Just curious if these cables are any good. I need to run an unbalanced RCA from my receiver to my Face Audio pro amp. Do they have a wired correctly as per the Shack's sticky for unbalance to balance signals? Also I wonder about the quality since it is so cheap and made in China. Thanks.
  16. Remotes | Cables | Accessories | Tweaks
    I have 2 SVS PB13 Ultras and I have connected them with rca cables to wall jacks. The running length of the rca cables are 30 ft and 20 ft. I am considering switching to XLR cables as I read that I maybe losing signal strength because of the long cable distance. If I run dual XLR cables the...
  17. Two Channel Audio
    Hi, Any good recommendation & choice ? Budget wise around US$500-600.
  18. System Setup and Connection
    Cv - I recently spoke with a friend about the potential of mono bridging a (non)-bridgable stereo amplifier via altered XLR cables from a fully balanced preamp and it sounds interesting /very useful to say the least. I have never heard of this before, so it is all new to me. I thought it would...
  19. System Setup and Connection
    Mogami makes great balanced interconnects -- does anyone know if Mogami balanced cables are used for subwoofer cables (they make perhaps the best microphone cables) and I have moved to subs that use and daisy chain via XLR cables and am trying to decide on Mogami or Blue jeans -- all are the...
1-19 of 30 Results
Top