05' RE XXX 15 or TC2000 15 for my HT
1 - 3 of 3 Posts
Joined
·
2,431 Posts
Both are solid subs. The 05 XXX is the older XBL^2 version using the industry standard 12 spoke basket and was quite good and probably is a bit more resilient to damage than the TC2K (have you ever seen one that has bottomed out?
). Neither one have warranty coverage anymore, but I know that Scott at Fi Car audio can recone the 05 XXX if it was ever needed.
). Neither one have warranty coverage anymore, but I know that Scott at Fi Car audio can recone the 05 XXX if it was ever needed.1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Audiopipe TSCVR15 help with details
DIY Subwoofers - General Discussiondoes anyone know the full specs for the Audiopipe TSCVR15 specifically the ( vas ) number- 2
- 357
-
dreadknot · updated
-
Is this too much air space for the 12 alpine bass line
DIY Subwoofers - General DiscussionFor home theater subwoofer use alpine bass line 12 4.50 cubic feet tuned to 24 hz? My nephew wanted a alpine bass line since they were only 60 bucks shipped. Vas 64.3 fs 30 qts 49 xmax 10 mm- 4
- 254
-
what amp for 200 watt rms pyle bl1290 sealed home theater subwoofer
DIY Subwoofers - General DiscussionI plan on going 4.00 cf gross for the pyle sub sealed this gives it a center frequency of about 35 hz and a -3 at 27 hz. We could even stuff it for an even lower center frequency and lower qtc than 1.10. The subwoofer is dual 4 ohm so we would need a amp at 200 rms at 8 ohms. Any suggestions...- 1
- 108
-
how much power before reaching xmax?
DIY Subwoofers - General DiscussionI have a image dynamics id 12 v4 250 rms i want to put it in a 4.50 cubic feet port tuned to 20.5 hz for just home theater use but i know this is a large box for it so power handling should go down. I have linux so i cant use windows programs to figure this out. I would appreciate help...- 1
- 143
-
What sub is this?
DIY Subwoofers - General Discussion15", about 800-1k power handling, roughly 2" P-P. About 40-50 pounds and DVC Underground company. I have some port chufing noise and need to figure out what to do to help minimize this issue. First start is knowing what I'm dealing with. Thanks!- 8
- 684
Join now to ask and comment!