[Tate10]

Hello everyone, I don't post very much but read the forums on a daily basis. I have built a lot of Subwoofer boxes of all kinds, but never built a sonosub. I have a 12" sonotube laying around and a 10" Audiopulse laying around. Would a 10" Audiopulse work well in a 12" sonotube. If it would work, how long? and what kind of port would you guys recommend? Thanks for your time, Tate

 

[Tate10]

It's an Audiopulse EPD210 EPIC 10" DVC Subwoofer 2 Ohm

Power handling: 600 watts RMS *VCdia: 2" *Impedance: 2 ohms per coil *Re: 3.6 ohms (series) *Fs: 25 Hz *SPL: 84.8 dB 1W/1m *Magnet weight: 140 oz *CMS: 300 uM/N *Mms: 128 g *BL: 14.1 Tm *Sd: 0.032 sq. m *Vas: 1.62 cu. ft. *Qms: 3.80 *Qes: .37 *Qts: .34 *Xmax: 22 mm *Dimensions: Overall diameter: 10.97", Cutout diameter: 9.50", Mounting depth: 5.62".

Thank you for the input

 

[Tate10]

Thanks for all your input, looks like I should just build a ported box for this job.

Tate